Build Thread Mustang5L5's Build Thread -

Mustang5L5 · Mar 10, 2022

vristang said:
Well, now I’m really curious….
Years back I mocked up and bench tested a variable speed fan controller, using an arduino, and ECT signal.
Worked perfect on the bench, but car died before I could put it on the road…

So, what signal are you sending to it? Using arduino?
You probably have this all documented….

Edit:
Just found the thread you did, good stuff!
I may play with using an arduino to supply the pwm. This could be a feature rich, and easy setup, for cheap, lol.
Thanks for the info!

I started building an Arduino setup for it. Was going to install a separate ECT sensor at the rear of the intake and compensate for it running slightly cooler there in the programming.

About 50% done but stopped to focus on getting the car back in one piece. Was using this thread as a guide

Variable Speed PWM Fan Control under $25 or less DIY - LS1TECH - Camaro and Firebird Forum Discussion

Forced Induction - Variable Speed PWM Fan Control under $25 or less DIY - This thread has gotten really big and it's pretty hard to find stuff, so I'm adding an index to key posts. Post Number) Topic. 1) Arduino controlled fan using a Mistubishi PWM fan module, Arduino Nano and a standalone NTC...

ls1tech.com

Mustang5L5 · Mar 11, 2022

Got the new grill emblem today

Looks to be 89+ by the part number . Package is 2006 dated.

Now, I had seen reference that the “correct” color for the fox body was the lighter shade of blue, but I didn’t expect the difference to be so dramatic. My original emblem has an E4 part number.

I went and checked my hatch emblem and it’s the darker variety. I changed that in 2000 when I painted the car, so no idea if the original hatch emblem is supposed to be light blue

I wanted an original emblem vs the repro because the only way to install is to remove the bumper. I didn’t want a repop to haze over or fade or anything…granted this 30+ year old original did.

nickyb · Mar 11, 2022

I like the lighter blue alot.

Mustang5L5 · Mar 11, 2022

Really? I’m not a fan. I prefer darker or black, so I’m happy with it.

General karthief · Mar 11, 2022

My emblem is darker,it's original.

nickyb · Mar 11, 2022

Mustang5L5 said:
Really? I’m not a fan. I prefer darker or black, so I’m happy with it.

I guess on my white lx lighter,but on black maybe darker.

BlakeusMaximus · Mar 12, 2022

I replaced mine when I redid my paint a few years ago. Now I have to go look and see what color mine are Mike.

Those black ones were cool.

Mustang5L5 · Mar 12, 2022

Dunno why I never noticed this but it got me going down the rabbit hole of the History of Fords logo. Long story short, Ford changed the color in 2003. All 2002 older cars originally had the brighter blue. All cars and replacement emblems after 2003 got the darker blue.

Interesting history, sorry for the detour.

Here they both are next to my ‘14. Ok. Enoigh on this

Noobz347 · Mar 12, 2022

Mustang5L5 · Mar 12, 2022

Real work.

Trimmed the coil cover to clear the STB. Need to clean up the edge a tad, but this works nice

Mustang5L5 · Mar 12, 2022

next up was the hood bumpers. The 1988-older used this odd spring clip design that was a pita to get apart.

Finally get them apart. They will not go back together again like they were without tooling, so the solution is to use a locknut.

Eh…..I dunno if I like how that looks.

Mustang5L5 · Mar 12, 2022

For some reason I thought the 89+ bumpers wouldn’t work on the older cars.

I was wrong. Gonna order these. They just look cleaner. No exposed hardware, even if I use ARP stainless jam nuts

Monkeybutt2000 · Mar 12, 2022

Do you by chance have the bolt sizes for your MM strut bar? I need to re-install mine and have misplaced the hardware.

Mustang5L5 · Mar 12, 2022

Monkeybutt2000 said:
Do you by chance have the bolt sizes for your MM strut bar? I need to re-install mine and have misplaced the hardware.

The sizes are in the instructions. I had to reference it recently to get new hardware

Monkeybutt2000 · Mar 12, 2022

Thank you

OldManRiver · Mar 12, 2022

While your filling your cart with new hood bumpers,might as well add a plug for the large hole in the passenger fender apron.

Mustang5L5 · Mar 12, 2022

OldManRiver said:
While your filling your cart with new hood bumpers,might as well add a plug for the large hole in the passenger fender apron.

Already have a couple. Was waiting for nice weather to give it a quick spray with trim black before I install it.

General karthief · Mar 12, 2022

Mustang5L5 said:
Dunno why I never noticed this but it got me going down the rabbit hole of the History of Fords logo. Long story short, Ford changed the color in 2003. All 2002 older cars originally had the brighter blue. All cars and replacement emblems after 2003 got the darker blue.

Interesting history, sorry for the detour.

Here they both are next to my ‘14. Ok. Enoigh on this

I had to look closely because in the garage mine looked dark, 1989, but I notice in the natural light it's brighter.

OldManRiver · Mar 12, 2022

Mustang5L5 said:
Already have a couple. Was waiting for nice weather to give it a quick spray with trim black before I install it.

Should've known this by now,my bad.lol

Mustang5L5 · Mar 13, 2022

Spent the day adjusting stuff. No pics.

Adjusting the hood, fenders, and messing with the hood struts. Also was attempting to set the alignment.

Total PItA. A good 2 hours spent and not sure I made progress. Not happy with a couple gaps. Guess I’ll keep playing with it. How the funk does Ford do this on a mass production scale? I’ve probably got 4-5 hours into this so far?!?

Setting the camber causes the C/C plates to contact the MrT hood struts barely. Looks like I have no choice but to dial in 1-1.5 degrees of camber. Not like it matters considering the tires will age out before tire wear is ever an issue, but I hate being limited on my adjustments for reasons like this. I feel like the hood support brace for the MrT setup could be redesigned slightly to the outside and would clear these perfectly. Oh well.

Ordered some stuff from LMR. I need the hood bumpers so I can continue adjusting.

Also, need to adjust my hatch and going to see if I can pick up. 92/93 hatch lock/striker. I always felt the later hatches closed more securely/rigid than the 91-earlier latches.

Build Thread Mustang5L5's Build Thread -

That is…until I whipped out my Bissell

That is…until I whipped out my Bissell

I gotta say i never painted my nuts, Never Ever

That is…until I whipped out my Bissell

wonder how much it would cost to ship you a pair

I gotta say i never painted my nuts, Never Ever

Still got to try a little lube on my speedo head

That is…until I whipped out my Bissell

Stangnet Facilities Maint Tech... Er... Janitor

That is…until I whipped out my Bissell

That is…until I whipped out my Bissell

That is…until I whipped out my Bissell

Mustang Master

That is…until I whipped out my Bissell

Mustang Master

Active Member

That is…until I whipped out my Bissell

wonder how much it would cost to ship you a pair

Active Member

That is…until I whipped out my Bissell

Similar threads

Privacy & Transparency

Privacy & Transparency