After a slight modification to my new C4, I found out I needed a deeper pan. I didnt want a cheap, cheesy chrome one off ebay, but I didnt want to spend $75-$120 on a deep brand name pan. SOlution: Make one myself.
Its 3.65" deep and made of 14gauge steel. Its powdercoated reflective silver to match the bellhousing. It is welded inside and out and does not leak at all.
I have less than $10 into the pan...including the powder, welding wire, and the steel to make it.
Shane
*****WELL, for some UNKNOWN reason, I cannot post a pic on Stangnet. I had to go back and delete a bunch of my posts with pics so I would have room to post a new picture. Well, low and behold, even though stangnet says I have enough of the 'allowable' space to post pics....I STILL CANNOT POST A PIC!! SO much for write-ups and How-Tos anymore.
Its 3.65" deep and made of 14gauge steel. Its powdercoated reflective silver to match the bellhousing. It is welded inside and out and does not leak at all.
I have less than $10 into the pan...including the powder, welding wire, and the steel to make it.
Shane
*****WELL, for some UNKNOWN reason, I cannot post a pic on Stangnet. I had to go back and delete a bunch of my posts with pics so I would have room to post a new picture. Well, low and behold, even though stangnet says I have enough of the 'allowable' space to post pics....I STILL CANNOT POST A PIC!! SO much for write-ups and How-Tos anymore.