My Winter Project- JYTT 5.0, Megasquirt, etc.

GTPTim · Mar 24, 2006

Blakthorn said:
Way to advanced for me, I dont have the skills to wire and solder that up like you do. Should I buy the already set kit, or find someone (HINT HINT) who love to wire it for a fellow enthusiast

LOL well you could buy the premade kit or you COULD find someone who would love to wire it... Hint Hint.. The only thing is you may want to make sure the guy who've you've paid big big bucks to gets his OWN car running correctly first.. Then the confidence level will be much higher.

Blakthorn · Mar 24, 2006

hey, were in NY we have to stick together

good luck with getting it all sorted

GTPTim · Mar 24, 2006

hahah good point Blackthorn!
And thank you. I plan on making lots of progress this weekend.. Although at the rate the weather's going I won't be able to ENJOY the car for at least another 5 months.. sheez..

mustangsally93 · Mar 24, 2006

megasquirt, I got that on my cobra... So where did you get yours? Also are you going with coil packs or dis. ? How much did you pay for yours?

GTPTim · Mar 27, 2006

As for the MS, I got it from DIYAUTOTUNE.COM. The price was very good, I think I paid $139 for the MS itself. V.2.2. I am doing distributor, stock ignition for now. I'm not going to have the MS control spark until I get myself an MSD 6a. For now it'll just be handling the fuel portion.

UPDATE! I got a little bit done this weekend- It was a very busy one, so I didn't get as much time out there as I'd hoped..
Driver's side, hung:

I don't have the return piping done for this side, but it shouldn't be too bad.. pretty much a straight shot.

Passenger Side:

As you can see they weren't lining up properly for me yet. A little more work and they will, on this side. It was 1 AM on Saturday by then, so I just quit. sometimes it's best to stop when you're tired and a bit frustrated and look at it the next day.
I'm trying to fit the turbos in the engine bay without cutting too much of the inner fender. This is taking some 'creativity' as there is NOT much room there.
Either tonight or tomorrow I'll have more updates.

GTPTim · Mar 28, 2006

So I found out the other day thanks to Turbomustangs.com that the turbos have to be sitting as close to level as they can. Therefore, my first attempt at setup was not going to work. Here is my SECOND ATTEMPT at this:

Here's the hole. It's a bit too small to start, but it's ALWAYS easier to remove more than it is to add more..

Test fit and (re)starting the plumbing.....

Thoughts? Does anyone still care about this? More pics tomorrow, I'll have a while to work on this tonight.

srothfuss · Mar 28, 2006

I'm still following. I just haven't posted in the thread because I don't have any usefull information to offer. I can't wait to see it all put together.

mustangsally93 · Mar 28, 2006

why are you going with the dis.?? When I got my MS I went with coil packs.. Worked better and looks a h e l l of a lot better I think... But thats me and my car I guess.. Looking bad as f u c k too man!!!

brands5.0 · Mar 28, 2006

keep up the good work... And keep the pic's coming

Blakthorn · Mar 28, 2006

in that spot are you going to be able to fit a filter, watch out for things flying up into it

grey5.0beast · Mar 28, 2006

Dang man looks like a good project. Good luck with the rest of it!

Marlboro_Man · Mar 28, 2006

Looking real good man!!! Keep us updated!

Where did you get your turbo headers?

GTPTim · Mar 29, 2006

Thanks everybody! I honestly haven't had time to tackle ignition yet. I'm going to start out with distributor cuz i already have it, it's costing me nothing, and will get the job done. Later on there's always room for improvement right? Coil packs, yeah that's a good idea. I will check into that in the future. As for now, I'm sticking with this frankly because I've almost totally depleted my project fund. Which is OK, cuz I have 99% of what I need to get this thing moving again, I think.
Thanks for the compliments guys! It's coming along. .

Yeah, this part is tough. I almost feel like i'm spending too much time here. I especially regret buying someone else's piping. I bought it cuz I was new to JYTT stuff, and thought I could save some time. Nope. I am remaking all the plumbing as I want it. I could have saved some money just buying flages, etc.. Oh well, live n learn. Just like redoing my stuff like 3 times so far.. I'm sticking with this setup as it is.
A lil update:

This is how far I got last night. Got the wastegate housing cut and welded properly.. I got the pipe from the header to the turbo done too. It took a while to do to get it to sit correctly, but it's done. I didn't get pics of the turbo clocked properly with the wastegate arm on yet, but will soon. . I need to start the other part of the exhaust now.. Sheesh..

As for the headers, they're just stock headers, flipped and reversed. That's it. I'll get something 1- 5/8" later on, but again, free, and available...
Yeah, I'll have to have some sort of protection for my filters. Not sure what yet, but something will be there.

wht93gtEd · Mar 29, 2006

you're not using external wategate's?

aren't you now going to have to mount the solenoid's (sp) somewhere on top of the turbo?

i'm a little confused about that...I think it may just be easier for external, and you could have them down around the bottom of the motor somewhere outta sight.

Also, not sure if you already mentioned it, but where's the outlet pipe?

however, keep up the good work & keep the pics flowing!!!

GTPTim · Mar 29, 2006

No, I'm using internal 'gates. The diafragms will be behind the fender. I am planning on cutting a little bit bigger a hole for clearance for this, but when I was building this section of the pipe for ease of moving it in and out so many times I didn't put it on yet.
The exit pipe isn't done yet.. One step at a time.

srothfuss · Mar 29, 2006

Fantaastic! I'm still loving that you use (for the most part) stock parts...

bynummustang · Mar 29, 2006

You my friend, make me jealous.

91ghp5.0 · Mar 29, 2006

i wish i had the knowledge! because i certainly dont have the cash for a hellion kit, but i want TURBOS!!

GTPTim · Mar 30, 2006

LOL I wish I had cash too.. I'd just buy a Hellion kit and be done with it. But then again, what's the fun in THAT? Thanks again guys. I didn't get anything done tonight like I wanted. Maybe tomorrow night I will get some work done out there! Definitely this weekend at some point. Today the weather was REALLY nice and I was itching. I gotta get it done soon..

brands5.0 · Mar 31, 2006

keep up the good work

My Winter Project- JYTT 5.0, Megasquirt, etc.

GTPTim

Member

Blakthorn

Member

GTPTim

Member

mustangsally93

New Member

GTPTim

Member

GTPTim

Member

srothfuss

Last night I stabbed the same guy 7 times in a row

mustangsally93

New Member

brands5.0

Blakthorn

Member

grey5.0beast

Cookies should never be DUNKED!!!

Marlboro_Man

Member

GTPTim

Member

wht93gtEd

Active Member

GTPTim

Member

srothfuss

Last night I stabbed the same guy 7 times in a row

bynummustang

Seen my other Jackstand?

91ghp5.0

Active Member

GTPTim

Member

brands5.0

Similar threads

My Winter Project- JYTT 5.0, Megasquirt, etc.

Member

Member

Member

New Member

Member

Member

Last night I stabbed the same guy 7 times in a row

New Member

Member

Cookies should never be DUNKED!!!

Member

Member

Active Member

Member

Last night I stabbed the same guy 7 times in a row

Seen my other Jackstand?

Active Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency