My Winter Project- JYTT 5.0, Megasquirt, etc.

I have updates, finally.. I realized I haven't posted here in a while, but there hasn't really been much to say.... I got the head gaskets back on, and the engine back together and running fine.
I've been TRYING to tune it with the Megasquirt since I got it, I've put in a few hours of road time, and still can't figure out how to tune this thing. I like to consider myself a fairly smart guy but I just can't get it tuned properly. AND on top of all that, must be after the head gaskets went and some water got into the oil I popped the oil bearings in the passenger side turbo.. cuz I noticed my BOV was spraying OIL, and I wasn't even boosting into positive pressure yet. That's right- I've been running for 3 weeks now since the new head gaskets, and haven't seen positive boost- I don't want to blow it again! anyway, I pulled the silicone elbow that connects the TB to the intake and had my friend start the engine.. It blew oil all over my hand from the turbo side. I dropped my intake piping and it was from the passenger side turbo.

I hate to do this, but I'm going to have to pack up the twins! I just don't have the cash for a rebuilt CHRA (i just had to spring for an Optima last week after some battery issues left me hangin) and I just want to drive my car. Summer is so short here in NY and I am really missin my Stang. I really wanted boost this year, but the learning curve on the Megasquirt is too steep and I don't have money for another CHRA. So, Like I said, they're coming off for the remainder of the summer so I can at least drive the car. I may look into going the route that Link did and many others, and just go with a MAS and A9L for fuel control, and not do the megasquirt... This sucks...
I'm NOT giving up though. Just putting it on hold..

Thanks guys. It does suck. I'm not giving up, just putting it on hold.
Let's see- cost? I'll try and do the best I can to remember.

Turbos- 200 initial cost (ebay)
200 new chra for one
100 - rebuild kit and new turbine wheel for the other (which is the bad one now)
60 - piping
42 lb injectors- 150 I think
400 - Megasquirt and wideband 02, $60 for the Diy wiring
40 for silicone and clamps
30 DSM BOV w/ flange
40 header wrap
I think that's about it.. from memory.

So, ,roughly 1300 and I'm sure I'm missing something. Probably more like $1500.