I just replaced my clutch and also replaced my motor mounts which were gone with some vert ones. I put on a Pro 5.0 shifter base about a year ago, and did not have major problems, just a small bit of vibration/squeaking from the interior trim. Now, when I put it all back together, my Pro 5.0 shifter sticks up a bit too much into the car. The plastic console trim is bowed up and vibrates and moves with every movement of the transmission, so I need to lower the shifter section by about 1/2". It has a fairly new rubber parts store tranny mount that is in good shape.
Does anyone make a shorter tranny mount, or does anyone have some suggestions? I thought about trying to adjust the motor mounts, but I'm not sure if that would move the shifter down enough with the new motor mounts.
Does anyone make a shorter tranny mount, or does anyone have some suggestions? I thought about trying to adjust the motor mounts, but I'm not sure if that would move the shifter down enough with the new motor mounts.