Paint and Body New project ,hood for 69 -70 Mustang

[horse sence]

This is one of those made cause i need it tools haha ,it even folds up . It popped that hood right out

 

[02 281 GT]

Perfect!

 

[horse sence]

The hood molding fits ,its not even tight

 

[horse sence]

Oh crap ,10 orders ,i may have to make another mold ,good thing i didnt damage the original hood

 

[02 281 GT]

Ten orders already? You could probably sell that mold to a manufacturer for a pretty penny. Can you patent or copyright a hood mold? If you can, I would, if I were you.

 

[horse sence]

Ten orders already? You could probably sell that mold to a manufacturer for a pretty penny. Can you patent or copyright a hood mold? If you can, I would, if I were you.

I dont think you can ,it will get copied sooner or later

 

[horse sence]

Ready for the air chamber . I made a card board pattern of the shape i need .the opening will be filled and can be cut to fit any motor and any motor location . I also need a sheet of fiber glass to make the extension and fill the air cleaner opening ,turns out an old 67 trunk lid has the right curvature both directions i need for my fillers .4 layers of mat ,when dry it will be cut and blended together to make the new chamber ,i still need to make a quick one time mold of the 71 chamber so i can make a piece to cut up and blend together

 

[horse sence]

My sheet of fiberglass trimmed , set in place and marked in several places for reference

 

[02 281 GT]

So you're going to make the ram air chamber in fiberglass as well?

 

[horse sence]

So you're going to make the ram air chamber in fiberglass as well?

Yes ,the original is also fiberglass . I have to do some modifying first

 

[horse sence]

Bump!

 

[Olivethefet]

What ever happened with this project?

 

[horse sence]

What ever happened with this project?

The mold and hood was finished ,but the ram air will not clear. Sold several of the hoods