Progress Thread Project: Buried Under A Mountain Of Snow Black Hole Money Pit.

RangerJoe · Mar 5, 2018

How much lift are you throwing at this thing? .700ish I hope.

Looks Good!

Joe

srtthis · Mar 5, 2018

we will see what Sam Vincent and Mark at bullet come up with but i expect it to be near 800

srtthis · Mar 8, 2018

well shes going to be a bit shy of 800... 800 is as big as i could go with my rockers anyway

HotFox · Mar 8, 2018

What heads again? What bore was used on the flow bench?

srtthis · Mar 9, 2018

HotFox said:
What heads again? What bore was used on the flow bench?

225 highports

4.030 bore on the flow bench...

HotFox · Mar 9, 2018

I honestly thought they would flow better, but could have been a conservative bench.
These are my AFR205 on a 4.030". Bought spring of 2011 if they have evolved.
Lift. Intake. Exhaust
0.05 33.9 26.8
0.1 68.1 62.3
0.15 108 88.6
0.2 147 112.7
0.25 182.6 138.2
0.3 209.9 161.1
0.35 234.5 180.9
0.4 258.4 197.1
0.45 275.5 213.5
0.5 282.6 222.3
0.55 291.3 226.5
0.6 297.4 229.5
0.65 303.1 231.3
0.7 309.2 232.9

srtthis · Mar 12, 2018

just remember... flow numbers arent everything.

there is a reason no AFR headed motors run with highport motors

srtthis · Mar 14, 2018

had a few free hours over the weekend.

srtthis · Mar 19, 2018

rolled her out of the garage over the weekend to move my air compressor and re run all the air lines in the garage so while it was outside i took the stock hatch off

if anyone was curious how much a stock hatch weighs... its a lot

A5literMan · Mar 19, 2018

srtthis · Mar 19, 2018

yes its all fun and games till you notice you are the only one home. and you pull it off yourself

Davedacarpainter · Mar 19, 2018

srtthis said:
yes its all fun and games till you notice you are the only one home. and you pull it off yourself

And it’s awkward as hell with the glass in it too.

srtthis · Mar 20, 2018

and i noticed i cracked one of my tail light lenses getting it off also

90sickfox · Mar 20, 2018

Which one.... right or left ? I have a set of clear ( white ones )and a passenger side stock one.

srtthis · Mar 21, 2018

driver side... ive been wanting to get a set of 84 SVO lights so i guess i have a reason now

srtthis · Mar 26, 2018

came across a deal for these over the weekend...

going to be working with Steve and Sharad to get a lower control arm that works with these.
and i guess if need be i'll be making my own lowers

srtthis · Mar 29, 2018

now that im down to the little stuff its time to get nickel and dimed to death

crank trigger bracket and sensor are on its way

srtthis · Apr 5, 2018

my really expensive timing pointer is here

General karthief · Apr 5, 2018

Did you have to sell your shoe to pay for it?

srtthis · Apr 5, 2018

yes... it was that damn expensive

Progress Thread Project: Buried Under A Mountain Of Snow Black Hole Money Pit.

I leave the horn on while driving

Sponsors (?)

the guy doing it does every local racers rear end

the guy doing it does every local racers rear end

the guy doing it does every local racers rear end

the guy doing it does every local racers rear end

the guy doing it does every local racers rear end

the guy doing it does every local racers rear end

At least it is lumpy...

the guy doing it does every local racers rear end

Chicks can make things hard if they’re inspired...

the guy doing it does every local racers rear end

Wasn't a pretty sight...and I've got big hands

the guy doing it does every local racers rear end

the guy doing it does every local racers rear end

Attachments

the guy doing it does every local racers rear end

Attachments

the guy doing it does every local racers rear end

wonder how much it would cost to ship you a pair

the guy doing it does every local racers rear end

Similar threads

Privacy & Transparency

Privacy & Transparency