putting it on a dyno next week, what to expect

[stangracr1979]

Im taking my 91 mustang to panhandle performance next weekend to get a chip and dynoed how much horse power should I expect here are a list of mods
Stock short block, paxton 2000 at 10 psi, twist wedge heads, 1.6 rolers, performer rpm intake, 75 mass air, 75 tb, 36lb injectors, all msd stuff, bassani 1 7/8 long tubes+3 off road X+3 inch flowmasters dumped,lunati blue racer cam,thats all i can think off with an aod

 

[stangracr1979]

here is the spec of the cam638-51028
5.0L Blue Racer Cam
Adv. Duration: 285°/291°
Duration @ .050'': 221°/232°
Gross Lift: .526''/.530''
Lobe Sep.: 111°

 

[88POSLX]

Depending on the boost level and the dyno (Mustang, dynojet) I'd guess 430rwhp.

 

[dreddstang]

On a dynojet, I'd say around 45-460, maybe more. My combo is very close to yours, N/A. I have an F can with the same heads and intake, 24# injectors, but everything else looks about the same. My dyno #'s on a dynojet were 310 rwhp and 335 rwtq. I have some tuning issues to work out with my crappy C&L MAF, though. I need to ditch that. I also have shorty headers.