• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Question (Non Roller Block)

  • Thread starter Thread starter bc86fiveoh
  • Start date Start date Sep 9, 2005
B

bc86fiveoh

New Member
Sep 7, 2005
3
0
0
Sep 9, 2005
#1
  • Sep 9, 2005
  • #1
I've searched but did not locate anything to my specific question.
I consider myself mechanically inclined but I've never built a motor (I've done just about everything else) so I'm about to try my hand at it.
I'm wanting to get about 300 to 350 hp on a carbed set up. Not for racing just to have it my stang. Is this an acceptable hp for an older 2 bolt main 302 block or would it be pushing the limits (strength of the block). In the search there were comments on the stock block being weak others that stated it was plenty strong. Also, I'm still researching the set up that I want but would there be any prob to using the stock crank?

Thanks
 

Lyncher

New Member
Jun 14, 2005
434
0
0
Sep 9, 2005
#2
  • Sep 9, 2005
  • #2
bc86fiveoh said:
I've searched but did not locate anything to my specific question.
I consider myself mechanically inclined but I've never built a motor (I've done just about everything else) so I'm about to try my hand at it.
I'm wanting to get about 300 to 350 hp on a carbed set up. Not for racing just to have it my stang. Is this an acceptable hp for an older 2 bolt main 302 block or would it be pushing the limits (strength of the block). In the search there were comments on the stock block being weak others that stated it was plenty strong. Also, I'm still researching the set up that I want but would there be any prob to using the stock crank?

Thanks
Click to expand...


the rule of thumb is that the stock block is safe up to 450rwhp....you will be more than fine with 350 . You will also be fine with the stock crank
 

bluevenom867

I will have images of molesting stuffed animals in
Dec 15, 2003
1,704
1
0
St.Petersburg,FL
Sep 9, 2005
#3
  • Sep 9, 2005
  • #3
A 302 block will support 350hp,especialy an early one.And if it is an early block,the stock crank is probably a 28oz crank,which is also stronger than the newer 50oz cranks.
 
You must log in or register to reply here.

Similar threads

S
Block questions
  • s_vargas54
  • Jan 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
21
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 8, 2026
Trogdor
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
9
Forced Induction Prepping for supercharger on non-stock build
  • 91fox427
  • Nov 25, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
594
Fox 5.0 Mustang Tech Jan 5, 2026
Qtrhrse23
F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
484
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
G
Fox Tire Size for 16" Pony Wheels on 1984 LX Convertible
  • gw7
  • Jun 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
238
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 25, 2026
Qtrhrse23
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?