• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Quick Tire Question...

  • Thread starter Thread starter daleclough
  • Start date Start date May 27, 2008
D

daleclough

New Member
Jun 17, 2007
18
0
0
May 27, 2008
#1
  • May 27, 2008
  • #1
Just bought a used set of staggered bullitts.

Running 10.5 x 17 DD wheels on the rear. Tires that came with them are 30-series. They don't really fill the wheel well as good as the front 40-series.

The car rides on H&R Supersport springs.

Any alternative sizes for teh rear wheel to better fill the wheel well?

I was thinking 295/40-17 for a little more sidewall.

Soliciting ideas not flames....

Thanks!
 

LaserSVT

Got FB banned again for saying nards
Founding Member
Nov 29, 1999
9,391
3,538
233
May 27, 2008
#2
  • May 27, 2008
  • #2
I have 285/40/17 on my Cobra wheels and I like the side wall height. I have 265/35 on my new wheels and really hate the o-ring look
What size is on the front?

Sin ce they are 10.5s id do a 315/35 on it as that would fill the wheel the best
 

scupking

Active Member
Sep 18, 2005
1,186
1
36
Enfield, CT
May 27, 2008
#3
  • May 27, 2008
  • #3
Specification Sidewall Radius Diameter Circumference Revs/Mile

245/45-17 4.3in 12.8in 25.7in 80.7in 785

255/45-17 4.5in 13.0in 26.0in 81.8in 775

255/50-17 5.0in 13.5in 27.0in 84.9in 746

285/40-17 4.5in 13.0in 26.0in 81.6in 776

295/40-17 4.6in 13.1in 26.3in 82.6in 767

315/35-17 4.3in 12.8in 25.7in 80.7in 785

Looks like 255/50-17 will have the largest Diameter on a 17inch wheel. I have 255/45-17s and like them. I like haveing as much side wall as posible.
 
D

daleclough

New Member
Jun 17, 2007
18
0
0
May 27, 2008
#4
  • May 27, 2008
  • #4
good info from both!

Thanks!
 

SonicBlueBella

New Member
May 19, 2007
3
0
1
Maryland
May 27, 2008
#5
  • May 27, 2008
  • #5
i have 17x10.5 Cobra R's on mine and i run a nitto nt555r 315/35/17 i put some pics below..

old pic of them on my car.. keep in mind my car isnt lowered


pic of when they were just mounted..


maybe that will help a lil, if not oh well!!
 

LaserSVT

Got FB banned again for saying nards
Founding Member
Nov 29, 1999
9,391
3,538
233
May 27, 2008
#6
  • May 27, 2008
  • #6
If not any chance to whore the car is good
 

crzyhrse99

Active Member
Mar 30, 2005
259
3
28
Kansas
May 27, 2008
#7
  • May 27, 2008
  • #7
This size calculator may help you also...
http://www.1010tires.com/TireSizeCalculator.asp
 

BurningRubber

10 Year Member
Dec 6, 2004
1,865
24
58
May 27, 2008
#8
  • May 27, 2008
  • #8
A 255 wont fit well at all on a 10.5" wide wheel, keep that in mind.

You may be able to fit a 275 on there at the minimum and get away with it...
 
D

daleclough

New Member
Jun 17, 2007
18
0
0
May 27, 2008
#9
  • May 27, 2008
  • #9
Here's what I have right now:

Front wheel; 17 x 9
Front rubber; 245-45 x 17

Rear wheel; 17 x 10.5
Rear rubber; 275-40 x 17

So it would appear that the front diameter is 80.7 inches and the rear is going to be bumped up to a 315 - 35 x 17.

Thanks again!
 

03TrueBlue

Member
May 1, 2008
68
0
6
Harrisburg Oregon
May 27, 2008
#10
  • May 27, 2008
  • #10
When I had 9s on the rear I ran 275/40s. If i was you i would put the 275s on the front and get a pair of 315s for the back
 

BurningRubber

10 Year Member
Dec 6, 2004
1,865
24
58
May 27, 2008
#11
  • May 27, 2008
  • #11
Here are a few pics of mine... 315/35/17's lowered on Roush springs.

It fills the wheel gap fine to me.





 

SaleenGT2001

Well-Known Member
Jul 18, 2005
2,811
4
58
Four Oaks NC
May 27, 2008
#12
  • May 27, 2008
  • #12
^ you need some smoked headlights. that would really make the whole car stand out
 

BurningRubber

10 Year Member
Dec 6, 2004
1,865
24
58
May 27, 2008
#13
  • May 27, 2008
  • #13
SaleenGT2001 said:
^ you need some smoked headlights. that would really make the whole car stand out
Click to expand...

I know man, I even tried to clean the stockers up they look so bad...

Hopefully I can get some before MW...
 

LaserSVT

Got FB banned again for saying nards
Founding Member
Nov 29, 1999
9,391
3,538
233
May 27, 2008
#14
  • May 27, 2008
  • #14
Shoulda bought the OEM Cobra ones I sold last month for $40
 
D

daleclough

New Member
Jun 17, 2007
18
0
0
May 28, 2008
#15
  • May 28, 2008
  • #15
oh hell yes that looks good....
 
You must log in or register to reply here.

Similar threads

C
2003 Mustang GT - Rear Tire Size Question
  • Cassiebaebae
  • Jun 29, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2
Replies
38
Views
863
1996 - 2004 SN95 Mustang -General/Talk- Jul 6, 2026
Cassiebaebae
C
Cobra Brake Conversion - Spare Wheel/Tire Search
  • AeroCoupe
  • Aug 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
93
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sunday at 10:48 PM
Shakerhood
P
Fox 17" Deep Dish Bullitts on Rear of Fox, 275/40/17?
  • pindude80
  • May 2, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
758
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 4, 2025
Noobz347
18” vs. 17” wheels on fox
  • dz01
  • Nov 14, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
26
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 28, 2024
2000xp8
R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
200
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?