removing stock emblems from car

[mdiggeryo]

wanted to kno if anyone could help me out. i've put on a saleen body kit onto my car and am planning on buyin the saleen badges and emblems to take place of the ones that say "ford" and "gt". wanted to kno if anyone could tell me the best way to remove them from the car so i dont leave any marks on the car itself or anything like that. i'm trying to go for a complete saleen conversion eventually and so i'm gonna need to take of the fender and back badges....

 

[MyEarsHurt]

Use a spatula or a flathead screwdriver, and wrap it in a terry cloth, so that you dont scratch anything.

 

[jpctln]

Thread/fishing line?

 

[89MustangGX]

I like to use a little heat -- not too much, a hairdryer or let the car sit in nice hot sun for a few hours is perfect. Wear a pair of gloves and use some fishing line or dental floss and saw back and forth around the emblem -- it will come right off. Then finish up the glue with goo gone.

 

[jpctln]

Right on.

 

[allen2oo3]

I like to use a little heat -- not too much, a hairdryer or let the car sit in nice hot sun for a few hours is perfect. Wear a pair of gloves and use some fishing line or dental floss and saw back and forth around the emblem -- it will come right off. Then finish up the glue with goo gone.

yup.

 

[glowstang93]

I usually use wd40 to loosen the adhesive, and carefully use a credit card or something similar. As with anything, you have to be careful what and how you do it. good luck

 

[cjman15]

last time i removed my LX emblem i just took a flathead screwdriver to it then used rubbing alcohol and goo-gone to get rid of tha rest of tha adhesive

 

[super302]

anything that can fit behind it and pry it off, jsut don't scratch your car.