• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

rocker arm ratio

  • Thread starter Thread starter innes
  • Start date Start date Sep 25, 2005
I

innes

New Member
Sep 23, 2005
10
0
0
Sep 25, 2005
#1
  • Sep 25, 2005
  • #1
i just picked up from the boneyard GT-40 heads off a 97'explorer (not GTP). It looks like the rocker arms on it are 1.5 cause i see the #5 on them.I plan on replaceing them anyway. the question i have is can i put 1.7 on it. i know the 93/94 cobra had these heads w/1.7 rockers.Are the heads completely simaler or are they alittle different and i have to machine them a little

P.S my car is a 88'thunderbird w/a mass air 5.0 HO motor auto
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Sep 25, 2005
#2
  • Sep 25, 2005
  • #2
yeah you can use them

also on another note. the only differnence on the P heads is the plug angle, to get like a better burn or something
 
B

bimmertech

New Member
May 3, 2005
1,123
0
0
merriam, ks
Sep 25, 2005
#3
  • Sep 25, 2005
  • #3
you can put whatever ratio you want to. what you have to worry about is proper geometry and the right springs for the cam/rocker. most likely though the rockers on those heads are 1.6's
 

bubba-dough

Active Member
Dec 28, 2004
1,044
2
38
Indiana
Sep 25, 2005
#4
  • Sep 25, 2005
  • #4
There are lots of differences between the GT40P and the regular old GT40 head. Not just the plug angle (which was done for a more efficient burn to increase power and reduce emissions). The intake runner volumes are different. The exhaust valves are different sizes. Combustion chambers are different sizes, roughly 5 cc if I remember correctly.

BTW: 1.7 rr's would work.
 
I

innes

New Member
Sep 23, 2005
10
0
0
Sep 25, 2005
#5
  • Sep 25, 2005
  • #5
thank you i had a feeling they would fit (1.7) assuming they did not change nothing from when they were on cobras. I guess now i have to figue out valve springs, ill probably use cobra springs since the were 1.7's.And push rods can i use the size on 97'explorer or cobras or 5.0 blocks different year to year.

AND BTW the GT-40P head are better some say 15-20hp more then the gt-40 but cause of the spark plug angle on the you cant get a header on them,thow i heard ford makes a header that will fit.the gt-40p heads can be found on 97 1/4 and up explorer/moutiner's
 

urban96

bubb rubb says:"woo woooooo"
Founding Member
Sep 24, 2002
3,464
1
69
Syracuse, NY
Sep 26, 2005
#6
  • Sep 26, 2005
  • #6
innes said:
thank you i had a feeling they would fit (1.7) assuming they did not change nothing from when they were on cobras. I guess now i have to figue out valve springs, ill probably use cobra springs since the were 1.7's.And push rods can i use the size on 97'explorer or cobras or 5.0 blocks different year to year.

AND BTW the GT-40P head are better some say 15-20hp more then the gt-40 but cause of the spark plug angle on the you cant get a header on them,thow i heard ford makes a header that will fit.the gt-40p heads can be found on 97 1/4 and up explorer/moutiner's
Click to expand...
you can get a header on no problem, same bolt pattern, but most aftermarket shorties have a tube that crosses infront of the #7 plug
 
I

innes

New Member
Sep 23, 2005
10
0
0
Sep 26, 2005
#7
  • Sep 26, 2005
  • #7
another question before i put the heads on should i deck them and how much i was told assuming the heads are the same cobras compression was 8.5-1.
 

urban96

bubb rubb says:"woo woooooo"
Founding Member
Sep 24, 2002
3,464
1
69
Syracuse, NY
Sep 26, 2005
#8
  • Sep 26, 2005
  • #8
a shop shouldnt charge much to resurface the heads and check them over
 
You must log in or register to reply here.

Similar threads

SN95 Desktop 363 Engine Combination - Looking for input
  • WhiteCobra95
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2025
Habu135
S
Requesting Guidance for 306 motor swap - Fuel? - SD? MAF?
  • So_Flo
  • Jul 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 4, 2026
Mcmahst
SOLD SOLD!!!! 1993 Notchback Roadracer For Sale. She's a beast!
  • Boydster
  • Apr 25, 2025
  • Fox Body Mustangs For Sale (1979-93)
Replies
0
Views
1K
Fox Body Mustangs For Sale (1979-93) Apr 25, 2025
Boydster
A
Fox Planning on building my foxbody and was wondering if I can get any tips or anything to watch out for!
  • Angelq1028
  • Oct 31, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3 4
Replies
76
Views
6K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 29, 2025
Robman8028
R
  • Locked
Engine How far can you go with an A9L (or other) factory computer?
  • reddy351
  • Oct 31, 2022
  • Fox 5.0 Mustang Tech
  • 2
Replies
31
Views
5K
Fox 5.0 Mustang Tech Nov 2, 2022
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?