Progress Thread She’s a runner

a91what · Dec 20, 2020

Its looking really cool, have you thought about making a cover for it? maybe to cover the transition from the TB.

so the plan is bodywork it and paint it the color of the car? [or black paint all of it black]

looks like you have plenty of room to weld on a bracket for the throttle cable, you can then make your own pivot arm.

CarMichael Angelo · Dec 20, 2020

You will be wasting your time with bodywork on something that’ll get that hot..Filler will bubble and lift. You’ll need to use something thats rated to withstand 200 plus degrees.

KZGUNS · Dec 20, 2020

a91what said:
Its looking really cool, have you thought about making a cover for it? maybe to cover the transition from the TB.

so the plan is bodywork it and paint it the color of the car? [or black paint all of it black]

looks like you have plenty of room to weld on a bracket for the throttle cable, you can then make your own pivot arm.

No I haven’t thought about that. Ya I know I just didn’t wanna go any further since I’ll be welding brackets and such. Not sure what color I’ll paint. I’m not getting crazy with it and I probably won’t paint it body color or glossy like that. Just “cleaning” it up basically.

KZGUNS · Dec 20, 2020

CarMichael Angelo said:
You will be wasting your time with bodywork on something that’ll get that hot..Filler will bubble and lift. You’ll need to use something thats rated to withstand 200 plus degrees.

Just did a quick search and there’s fillers made for the powder coating industry. I’ll see where I can get some.

a91what · Dec 20, 2020

powder coating it would be cool also.. or you could just use the wrinkle black, it will cover the imperfections

KZGUNS · Dec 20, 2020

a91what said:
powder coating it would be cool also.. or you could just use the wrinkle black, it will cover the imperfections

I do like that textured finish.

KZGUNS · Dec 20, 2020

Not too much to report today. I got my throttle cable. Checked factory cable and it pulled 2” when I checked the TB I’ll have to do some math to mount the lug to get wot. This tb is made for a lightening so the cable will pull from behind instead of from in front. Also after some consultation with my favorite tuner and just overall knowledgeable guru I think I’m gonna run LS coils. Build my own harness or buy one and modify? Still need to search online for a wire diagram and also buy coils etc

KZGUNS · Dec 25, 2020

Anybody use recaro seats from a VW GTI/GLI ? They seem like size wise they’d work. Or am I missing a better option. I do like the 82 recaro lx seats but they seem hard to get and expensive

nickyb · Dec 25, 2020

Well I just installed a pair of corbeau sport seats and let me tell you they are comfy and firm.I used my stock sport seat brackets so just the cost of the seats,and cyber mon deal was under $600 shipped,thank you American muscle.

KZGUNS · Dec 25, 2020

nickyb said:
Well I just installed a pair of corbeau sport seats and let me tell you they are comfy and firm.I used my stock sport seat brackets so just the cost of the seats,and cyber mon deal was under $600 shipped,thank you American muscle.

I’ll check those out

nickyb · Dec 25, 2020

Let me know,I'll give you the run down on using stock seat brackets,including pics.

nickyb · Dec 25, 2020

Here a pic

KZGUNS · Dec 25, 2020

nickyb said:
Let me know,I'll give you the run down on using stock seat brackets,including pics.

Thanks! I already have aftermarket seats that are mounted to a flat plate and sliders so hopefully it’s pretty easy to mount them to that.

Mustang5L5 · Dec 25, 2020

KZGUNS said:
Anybody use recaro seats from a VW GTI/GLI ? They seem like size wise they’d work. Or am I missing a better option. I do like the 82 recaro lx seats but they seem hard to get and expensive

Yes, that’s what’s in my car

They are tough to find, and then pricey to recover

KZGUNS · Dec 25, 2020

Looks great @Mustang5L5

nickyb · Dec 25, 2020

Those recaros are sick,but too much to spend on my daily. I got the corbeau seats for less then I could redo my originals They were tore up from the floor up..

2000xp8 · Dec 26, 2020

Since i'm doubting this car is your daily driver, be patient.
You may not find them over night.
You likely won't find them cheap, but in the end it's worth it.
Besides, half the fun is finding things.
Look at it this way, look how much effort you are making with the supercharger to do something different, why should the seats not get the same treatment?

The sun obscured these pics of the rears, but they match.

KZGUNS · Dec 26, 2020

2000xp8 said:
Since i'm doubting this car is your daily driver, be patient.
You may not find them over night.
You likely won't find them cheap, but in the end it's worth it.
Besides, half the fun is finding things.
Look at it this way, look how much effort you are making with the supercharger to do something different, why should the seats not get the same treatment?

The sun obscured these pics of the rears, but they match.

Those look awesome!

KZGUNS · Dec 27, 2020

Back to the intake for now. I got the iac mounted. I’ll probably just put a breather filter on this with a short piece of hose to clear the valve cover. Hopefully those show up soon so I can figure out how I’m gonna mount the coils.

a91what · Dec 27, 2020

Want pictures of my setup?

Progress Thread She’s a runner

SendMeUrDataLog

my rearend will smell so minty fresh,

I can swing up to 11”

I can swing up to 11”

SendMeUrDataLog

I can swing up to 11”

I can swing up to 11”

I can swing up to 11”

I gotta say i never painted my nuts, Never Ever

I can swing up to 11”

I gotta say i never painted my nuts, Never Ever

I gotta say i never painted my nuts, Never Ever

Attachments

I can swing up to 11”

That is…until I whipped out my Bissell

I can swing up to 11”

I gotta say i never painted my nuts, Never Ever

Attachments

I can swing up to 11”

I can swing up to 11”

Attachments

SendMeUrDataLog

Similar threads

Privacy & Transparency

Privacy & Transparency