• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Should I buy a tweecer?

  • Thread starter Thread starter BaylorBear
  • Start date Start date Aug 29, 2011
  • 1
  • 2
Next
1 of 2 Next Last
B

BaylorBear

Member
May 16, 2011
43
0
6
Alice/Waco Texas
Aug 29, 2011
#1
  • Aug 29, 2011
  • #1
Well like the title says, would a tweecer be worth it?
1994 GT 351 swap. AODE. somewhere down the line i do want to do a T5 swap from a donor 91, and i know there would be a problem with the computer mixing the air/fuel ratio at the AODE shift points. I could get a computer from another car, but if i understand right the tweecer can turn off the AODE functions? Would it be worth it, what else does it do?
 

Zero Signal

Active Member
Feb 24, 2003
2,633
2
46
Tucson, AZ
Aug 30, 2011
#2
  • Aug 30, 2011
  • #2
I'm pretty sure the strategy is different than the 5spd. You would likely need to change it over. I'm not familiar with the AODE strategy though, so I'm not sure what the differences are.

It may be cheaper to buy a used computer and harness, but it would also be more work.
 

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"
15 Year Member
Nov 29, 1999
14,679
424
154
Boca Raton, Florida
Aug 30, 2011
#3
  • Aug 30, 2011
  • #3
Using a twEECer with an AOD-E tranny is well worth it. With the twEECer you can change the shift points, add a redline, etc. With the economy the way it is currently you could probably pick up a twEECer for nothing. I know for our project the twEECer has been a life saver because of it's datalogging capability. We changed so many things and getting the car just to idle took mere minutes with the twEECer. We could have been chasing gremlins for days even weeks without it. Nowdays a tool like this is worth its weight (rather money). If you don't get a twEECer then look into a P.M.S., Megasquirt or getting the car running and take it for a dyno tune right away. Regardless after this swap any of these will be a need.



 

Attachments

  • 1cf10c5b.webp
    35.3 KB · Views: 177
B

BaylorBear

Member
May 16, 2011
43
0
6
Alice/Waco Texas
Aug 30, 2011
#4
  • Aug 30, 2011
  • #4
Thanks! I will surely buy one! Plus i can tune my friends car if i get good and my danger ranger will get some love too
 
2

2002BLGT

Well-Known Member
Dec 18, 2003
2,945
4
59
Bedford VA
Aug 30, 2011
#5
  • Aug 30, 2011
  • #5
Moates Quarterhorse offers live tuning and the BE software is better
 
B

BaylorBear

Member
May 16, 2011
43
0
6
Alice/Waco Texas
Aug 31, 2011
#6
  • Aug 31, 2011
  • #6
I don't know, the tweecer just seems easier to use
 

Last5.0

Active Member
Nov 9, 2003
404
1
26
Aug 31, 2011
#7
  • Aug 31, 2011
  • #7
I use the BE software with my twEECer. The software that comes with the twEECer is a bit outdated.

A Quarterhorse is cheaper and probably a bit better than a twEECer since it can datalog more data at the same time than the twEECer can and do the live tuning, but it is a bit more involved to install and to hook up a multi-tune switch if you wanted that.
 

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
42,973
21,150
234
Box behind Walmart
Aug 31, 2011
#8
  • Aug 31, 2011
  • #8
I wouldn't give a plug nickel for a TwEECer but I'm a tuning dumbass. There are folks who have had great success with them but I ended up selling mine on Ebay and getting an Anderson PMS.
 
2

2002BLGT

Well-Known Member
Dec 18, 2003
2,945
4
59
Bedford VA
Aug 31, 2011
#9
  • Aug 31, 2011
  • #9
Noobz347 said:
I wouldn't give a plug nickel for a TwEECer but I'm a tuning dumbass. There are folks who have had great success with them but I ended up selling mine on Ebay and getting an Anderson PMS.
Click to expand...

And I would pay $100 dollars to anybody that will let me smash a PMS with a baseball bat so I can youtube it.
 

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"
15 Year Member
Nov 29, 1999
14,679
424
154
Boca Raton, Florida
Sep 1, 2011
#10
  • Sep 1, 2011
  • #10
2002BLGT said:
And I would pay $100 dollars to anybody that will let me smash a PMS with a baseball bat so I can youtube it.
Click to expand...

Is that because the P.M.S. is easier to use by the general public? I had one on my 94Gt and it sure did help my 347 run great. I had an older style P.M.S. too (non Nitendo controller). For what I paid for it I was pleased with the performance.



 

Attachments

  • PMSlocation.webp
    34.7 KB · Views: 180
  • PMSat80MPH.webp
    20.8 KB · Views: 153

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
42,973
21,150
234
Box behind Walmart
Sep 1, 2011
#11
  • Sep 1, 2011
  • #11
VibrantRedGT said:
Is that because the P.M.S. is easier to use by the general public? I had one on my 94Gt and it sure did help my 347 run great. I had an older style P.M.S. too (non Nitendo controller). For what I paid for it I was pleased with the performance.
Click to expand...


I think it's becaues of this:

2002BLGT's Signature said:
SCT certified / Delta Force / Diablosport / Moates Tuner
Dynocom Loaded Chassis Dyno
Click to expand...


His services are not required.
 

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"
15 Year Member
Nov 29, 1999
14,679
424
154
Boca Raton, Florida
Sep 1, 2011
#12
  • Sep 1, 2011
  • #12
Exactly.

What is going on in your bottom Avatar? That is hysterical. Who knew Sparky to levitate. Chris Angel is pissed.
 

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
42,973
21,150
234
Box behind Walmart
Sep 1, 2011
#13
  • Sep 1, 2011
  • #13
LOL... I'm sure the dog wonders everyday why that dude gets paid.
 

Zero Signal

Active Member
Feb 24, 2003
2,633
2
46
Tucson, AZ
Sep 2, 2011
#14
  • Sep 2, 2011
  • #14
BaylorBear said:
Thanks! I will surely buy one! Plus i can tune my friends car if i get good and my danger ranger will get some love too
Click to expand...

The TwEECer only works on one car at a time. Not sure if you're thinking you can tune multiple cars with one TwEECer, but it does require that the device stays attached to your computer full time.
 
B

BaylorBear

Member
May 16, 2011
43
0
6
Alice/Waco Texas
Sep 2, 2011
#15
  • Sep 2, 2011
  • #15
That is what i was thinking so i guess i will just do my car lol. The anderson pms they mention isn't it like $1G? or am i looking at something different
 

99FiveOh

15 Year Member
May 20, 2006
2,051
20
99
J-Ville, FL
Sep 2, 2011
#16
  • Sep 2, 2011
  • #16
Yeah, the PMS can't do half of what a Tweecer or Quarterhorse can do and costs 2-3 times as much! If it wasn't tied to the "Anderson Ford Motorsports" name it would probably cost half of what it does. I had a buddy with one and him nor I was impressed with it.

What I'd like to see is some hand held game consoles that could actually tune cars! Imagine using your PSP or hell, even a smart phone to tune your 'Stang! lol
 

Adam95GT

New Member
Aug 14, 2006
2,564
3
0
Burlington, NJ
Sep 2, 2011
#17
  • Sep 2, 2011
  • #17
Im considering writing and wiring up an arduino board so i can change the tune of my car through my cell phones bluetooth. But i didnt think anyone would be interested.
 

99FiveOh

15 Year Member
May 20, 2006
2,051
20
99
J-Ville, FL
Sep 2, 2011
#18
  • Sep 2, 2011
  • #18
Adam, for a smart guy you can be dense at times! lol OF COURSE we'd be interested!! hellz yeah!!
 

Last5.0

Active Member
Nov 9, 2003
404
1
26
Sep 2, 2011
#19
  • Sep 2, 2011
  • #19
I know it's not for tuning, but I think there's an iphone app that uses the built in accelerometer and gps and gives you performance data on your car like 0-60 and 1/4 mile times like the old GTECH.
 
2

2002BLGT

Well-Known Member
Dec 18, 2003
2,945
4
59
Bedford VA
Oct 12, 2011
#20
  • Oct 12, 2011
  • #20
The technology behind the PMS is outdated, offers less control than a simple chip and is WAY overpriced for what it offers.

PMS is $969 new and a Moates chip and burner and wideband would be about half of that , not to mention you have to run MSD ignition with the PMS , so add the price of ignition box and the wideband to the $969 , you will be over $1300 really quick

Timing is timing , and fuel is fuel , engine and car doesn't know the difference , so why would you want to do it a hack job way for double the price , or reprogram the FORD data to show the actual injector and MAF data for the injectors and MAF you are actually running
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

F
Electrical Foxbody wiring harness 2.3 to v8 swap
  • Foxbodyjake
  • Mar 23, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
649
Fox 5.0 Mustang Tech Apr 13, 2026
Foxbodyjake
F
Progress Thread 93 LX father son project
  • ZAM93LX
  • Oct 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 3, 2025
Scrapla347
Fox Fuel Pump Issues After Replacement/Upgrade
  • Ryu
  • Jun 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
425
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Yesterday at 11:45 PM
Ryu
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
652
1996 - 2004 SN95 Mustang -General/Talk- Jan 11, 2026
02_2v_Curtis
0
R
For Sale 91 Foxbody [cobra clone] 100,??? Miles
  • Rabid fox
  • May 13, 2025
  • Fox Body Mustangs For Sale (1979-93)
Replies
1
Views
896
Fox Body Mustangs For Sale (1979-93) May 28, 2025
Nostang25
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?