• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

silly question?

  • Thread starter Thread starter jcw88
  • Start date Start date May 30, 2007

jcw88

Never played w/ it before so i'm still a virgin!
Mar 20, 2007
53
0
0
fernandina, fl
May 30, 2007
#1
  • May 30, 2007
  • #1
this going to be a silly question but i just to make sure i'm not crazy, a friend of mind is trying to tell me that by rotating your mass air meter you can adjust the way your car idles... sounds like he's retarded. he says that the way the airflows threw the mass air it could be choking it out so by rotating it you can get better flow?????? any questions?????
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
May 30, 2007
#2
  • May 30, 2007
  • #2
never heard of that before.
 

bloopbloob

Member
Sep 27, 2006
578
4
16
Alberta
May 30, 2007
#3
  • May 30, 2007
  • #3
he's right (kind of)! i tried (as suggested on stangnet!!) rotating my aftermarket 76mm MAF because i was running rough and throwing codes immediately after the install. i still have codes, but it runs better after turning it . i believe it has something to do with where the sensor is on your intake tract, and different areas can experience different turbulence etc. which can cause it to give inaccurate readings
 

4G-KDMP

10 Year Member
Jul 23, 2005
935
19
39
CA
May 30, 2007
#4
  • May 30, 2007
  • #4
i've also read somewhere that by rotating your mass air you can adjust the way your cars idle, but just don't have much faith in it.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
May 30, 2007
#5
  • May 30, 2007
  • #5
It's true. It's called clocking the meter. It's especially useful for people using open air filter elements under the hood, or on load-based processors (where MAF signals are even more critical).
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,361
211
114
Ohio
May 31, 2007
#6
  • May 31, 2007
  • #6
I have the SN95 Meter on my car, it just hangs there and did not bolt to the fenderwell as the Fox Style. I just tried to get the Electronics part as close to being at the 12 O'Clock Position as possible, the car runs great although my Coolant Temp has increased slightly since the install.
 
You must log in or register to reply here.

Similar threads

S
  • Locked
Drivetrain Adjustable clutch cable questions
  • Scott_S
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
556
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
A
Resolved Brake light switch
  • Alabama
  • Feb 24, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
31
Views
4K
Fox 5.0 Mustang Tech Jun 25, 2026
General karthief
F
For Sale 03 Redfire Cobra Convertible
  • FastFox5oh
  • Jul 14, 2026
  • SN95 Mustangs For Sale (1994-04)
Replies
0
Views
303
SN95 Mustangs For Sale (1994-04) Jul 14, 2026
FastFox5oh
F
P
Progress Thread New To Me 1988 GT - trying to set up vacuum lines for upper intake question
  • pindude80
  • May 6, 2025
  • Fox 5.0 Mustang Tech
  • 9 10 11
Replies
214
Views
16K
Fox 5.0 Mustang Tech Mar 28, 2026
pindude80
P
Progress Thread The Mach Returns - Update/build thread
  • squeak93
  • Feb 20, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
19
Views
996
1996 - 2004 SN95 Mustang -General/Talk- Monday at 10:08 AM
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?