• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

So so track times...

  • Thread starter Thread starter kyles03sonicgt
  • Start date Start date Oct 19, 2006
K

kyles03sonicgt

New Member
Nov 30, 2005
111
0
0
Berkley, Michigan
Oct 19, 2006
#1
  • Oct 19, 2006
  • #1
Well I finally got out to the track for the first time in a long time. I have got alot of new parts since the last time I ran. When I had just an intake, tb/plenum, pullies, catback and nitto d/rs, I got a 13.9. Since then I got 4:10's, mid pipe, nx 100 shot and some bfg d/rs. I was hoping for a 12.7 today. I only got to run twice and my first run was the best...

RT .47
60ft 2.05
330ft 5.71
1/8et 8.61
1/8mph 84.5
1000'et 11.09
1000'mph 98.48
1/4et 13.11
1/4mph 108 (high trap for 13.1 correct?)

Considering I haven't been at the track in so long, I was somewhat pleased with the car. It was chilly and I dont have a bottle warmer installed yet so my pressure was low at around 800psi, so that right there would be atleast a tenth or two. BFG d/rs work like a gem fellas. I was dumping jus shy of 4k and I would bog!! I didn't spray from the hole, but I'm defanitely going to start spraying on launch. I hope to catch the track one more time with my bottle heater and I hope to hit a 12.7, sound about right??
 

Warrior 102

New Member
Jan 22, 2003
231
0
0
Macomb MI
Oct 19, 2006
#2
  • Oct 19, 2006
  • #2
kyles03sonicgt said:
Well I finally got out to the track for the first time in a long time. I have got alot of new parts since the last time I ran. When I had just an intake, tb/plenum, pullies, catback and nitto d/rs, I got a 13.9. Since then I got 4:10's, mid pipe, nx 100 shot and some bfg d/rs. I was hoping for a 12.7 today. I only got to run twice and my first run was the best...

RT .47
60ft 2.05
330ft 5.71
1/8et 8.61
1/8mph 84.5
1000'et 11.09
1000'mph 98.48
1/4et 13.11
1/4mph 108 (high trap for 13.1 correct?)

Considering I haven't been at the track in so long, I was somewhat pleased with the car. It was chilly and I dont have a bottle warmer installed yet so my pressure was low at around 800psi, so that right there would be atleast a tenth or two. BFG d/rs work like a gem fellas. I was dumping jus shy of 4k and I would bog!! I didn't spray from the hole, but I'm defanitely going to start spraying on launch. I hope to catch the track one more time with my bottle heater and I hope to hit a 12.7, sound about right??
Click to expand...
that is not bad,but you can see better # whit 108MPH......
What track you going to in MI?
 

BooWFO

New Member
May 10, 2005
991
0
0
Louisville, KY
Oct 19, 2006
#3
  • Oct 19, 2006
  • #3
When I had basically the same setup I went 12.5's. Get that 60' down a lil more and spray it good, also I suggest checking bottle pressure after the run to see how much drop your getting going down the track.
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
Oct 19, 2006
#4
  • Oct 19, 2006
  • #4
Track times threads belong in the talk sections. Unless there is a question and your posting the times to aid in somebody answering that question.
 

Jackie Chan

I didn't read this.
Founding Member
Oct 17, 2002
2,507
4
48
Orlando, FL
Oct 19, 2006
#5
  • Oct 19, 2006
  • #5
should be a low 12 sec car on the bottle driving the piss out of it. but you need to spray out of the hole and drive it.

last week i went 12.8 on an easy 1.8 60' @ 113
2 passes later i launched it a little harder and powershifted down the track and went 11.9 @119 w/a 1.77 60'

If you dont drive them hard they wont run the numbers
 
K

kyles03sonicgt

New Member
Nov 30, 2005
111
0
0
Berkley, Michigan
Oct 19, 2006
#6
  • Oct 19, 2006
  • #6
You know what man your right...I kinda babied the car because it was the first time with the spray at the track. Next time I head out, I'm gauranteeing myself atleast a 12 sec. pass.
 
You must log in or register to reply here.

Similar threads

O
Progress Thread LTD-ing
  • OX1
  • Mar 15, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
327
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 6, 2026
OX1
O
Progress Thread Progress Thread- From6to8's 1994 Cobra Supercharger install
  • from6to8
  • Sep 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 20 21 22
Replies
420
Views
9K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
459
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Which one of these 3 intakes make the most sense for my 331 combo
  • from6to8
  • Jul 25, 2024
  • 1994 - 1995 Specific Tech
Replies
7
Views
2K
1994 - 1995 Specific Tech Jul 26, 2024
AeroCoupe
Engine Foxbody idle/throttle issues
  • red5.0fox
  • Mar 8, 2023
  • Fox 5.0 Mustang Tech
  • 11 12 13
Replies
255
Views
27K
Fox 5.0 Mustang Tech Jun 29, 2024
red5.0fox
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?