• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

stupid question, 94 cobra vs 95 camaro lt1

  • Thread starter Thread starter viridionplague
  • Start date Start date Feb 21, 2008
  • 1
  • 2
Next
1 of 2 Next Last
V

viridionplague

New Member
Oct 8, 2007
98
1
0
Feb 21, 2008
#1
  • Feb 21, 2008
  • #1
so anyways i got in touch with an old friend the other day and he has a 95 camaro lt1, 6 speed

the kid thinks hes all badass and king of the hill, and i plan on showing him what for.

ive got the stuff in my sig and soon to be a trick flow track heat upper and lower intake manifold and 75 MM throttle body with 1 inch spacer

also going to be doing a custom cold air at the same time i do the intake

im pretty sure i should be able to take him being that alot is in the driver and he aint to hot and im better than most the people i know

opinions? or do you think im going to need a little more?
 

DDSTANG94

New Member
Dec 9, 2006
465
2
0
FRASER, MICHIGAN
Feb 21, 2008
#2
  • Feb 21, 2008
  • #2
u might need some gears
 

Yobi1Kanobi

Member
Apr 9, 2003
559
0
16
Feb 21, 2008
#3
  • Feb 21, 2008
  • #3
he might smoke u...unless he really sucks
 
V

viridionplague

New Member
Oct 8, 2007
98
1
0
Feb 21, 2008
#4
  • Feb 21, 2008
  • #4
wow dont know why that isnt in my sig.

i do have 3:73 gears,


i dont think hes been driving a stick shift long and hes already put 2 cars into the back of trucks, totaling the first one
 

Pokageek

Active Member
Jun 10, 2005
2,767
0
46
MA, USA
Feb 21, 2008
#5
  • Feb 21, 2008
  • #5
I owned one. Automatic. It was a hit or miss cuz I drove an SS that was as slow as my 94 gt was stock.

That being said, a 305HP DOHC Cobra was a dead heat match for me but not a gt or 5.0 cobra. I blew their doors off. You are going to need gears for sure and that's if he doesn't do anything to his. I put headers, CAI and ran a 13.5 in mine. A 6 speed will be even faster. On the Hwy he will kill you with the gearing he has.

In other words, based on my auto that was running 14.0 stock with 3.23 gears, you are going to need to run faster than like..13.8 to stay with or beat him in my o.
 
V

viridionplague

New Member
Oct 8, 2007
98
1
0
Feb 21, 2008
#6
  • Feb 21, 2008
  • #6
you guys think it might be worth haveing my stock gt40's ported up and getting a tfs stage 1 and 1.6 RR's ??
 
5

5.0beast

New Member
Feb 5, 2008
3
0
0
atlanta georgia
Feb 21, 2008
#7
  • Feb 21, 2008
  • #7
definatley
 
D

dans89lx

New Member
Jan 23, 2007
46
0
0
Feb 21, 2008
#8
  • Feb 21, 2008
  • #8
viridionplague said:
you guys think it might be worth haveing my stock gt40's ported up and getting a tfs stage 1 and 1.6 RR's ??
Click to expand...

without that you will have to drive your ass off and you may still take a hit. those cars run strong
 

BlackVert

15 Year Member
Oct 3, 2003
5,589
9
98
Bethesda, MD
Feb 21, 2008
#9
  • Feb 21, 2008
  • #9
you are talking about probably a grand or more of work for what ... just to maybe beat an old friend who has a camaro? stop and think about that for a minute.

no, it's not even close to being worth it. that grand is alot better spent towards heads, cam and intake from the corral classifieds.

in my opinion, you should NEVER do anything to your car just so you can beat some schmuk. there will always be another guy out there with a faster car. guaranteed.

save your money, decide what YOU want for your car, make a plan, and work towards that. at that point, it will most likely be a good bit faster than him, unless he does the same thing with his. like it or not, he has the advantage because of the extra cubes.
 
V

viridionplague

New Member
Oct 8, 2007
98
1
0
Feb 21, 2008
#10
  • Feb 21, 2008
  • #10
well its not just that, ive wanted to get a set of heads and a cam for a while now i just cant shell out 1300 on some nice afr's, then still needing RR's and a cam

ive been thinking about doing this for a while now, that i could get my gt40's ported localy for a few hundred, the cam and rockers for another few hundred and i should have a decent h/c/i at about half the cost, say 700 ish.

also maybe i could get a custom cam ground for this application to best utilize the parts listed

this is just the first time ive asked this question, or would it realy be that much better to spend twice as much for some AFR's?

also since im going to be doing the intake manifold i thought i would not be to much more difficult to do the heads and cam since i will be right there as well, im also interested in checking the overall condition of the engine as i am planning on getting a procharger d-1 this summer

after the procharger comes the r302 347
 

Pokageek

Active Member
Jun 10, 2005
2,767
0
46
MA, USA
Feb 21, 2008
#11
  • Feb 21, 2008
  • #11
Personally I would skip the aluminums totally and just put the money toward blower. Your heads flow well enough for that blower. ALOT better than my e7's did when I had my 302. I just don't see the aluminums as flowing enough better for a power adder for the MONEY but that is just me. Now.. if you can find some good aluminums used I would bc it will take 40+ pounds off yer front end to make up for the blwer. Not a bad idea and a little better flow. Now the weight difference is more for quarter milers.. you won't feel it on the seat of pants dyno.

Good luck either way! I would rather have your car than any camaro no matter how fast and the cobra is not a slouch!
 

95BlueStallion

My assy trans to myself
15 Year Member
Feb 22, 2007
5,126
3,091
214
Cedar Rapids, Iowa
Feb 22, 2008
#12
  • Feb 22, 2008
  • #12
Pokageek said:
Personally I would skip the aluminums totally and just put the money toward blower. Your heads flow well enough for that blower. ALOT better than my e7's did when I had my 302. I just don't see the aluminums as flowing enough better for a power adder for the MONEY but that is just me. Now.. if you can find some good aluminums used I would bc it will take 40+ pounds off yer front end to make up for the blwer. Not a bad idea and a little better flow. Now the weight difference is more for quarter milers.. you won't feel it on the seat of pants dyno.

Good luck either way! I would rather have your car than any camaro no matter how fast and the cobra is not a slouch!
Click to expand...

+1, if youre gettin a blower anyway, get a customer cam made for the blower application and just get the blower. You can always go back and throw heads on later, but the GT40s flow way better than most of our E7's...
 

95cobraguy

Member
Dec 23, 2005
637
11
19
Concord, NC by way of LI, NY
Feb 22, 2008
#13
  • Feb 22, 2008
  • #13
viridionplague said:
hes already put 2 cars into the back of trucks, totaling the first one
Click to expand...

and u really want to race this guy? why, so u end up in the back of a truck also trying to beat a car that u have no chance of beating?
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Feb 22, 2008
#14
  • Feb 22, 2008
  • #14
94 Cobra vs. 95 LT1 Camaro? Should be a drivers' race. Bring an LS1 into the mix, and you'll watch it run away from you rather quickly.

And I just wanted to add, don't turn this into a street racing thread or it gets the
 
V

viridionplague

New Member
Oct 8, 2007
98
1
0
Feb 22, 2008
#15
  • Feb 22, 2008
  • #15
o i by no means want a street race, especialy with this kid around

ive been wanting to make a trip to the track for a while and was going to reguardless of race, but in this case ill take him with
 

ProKiller

Founding Member
Apr 26, 2002
3,064
15
78
PA
Feb 22, 2008
#16
  • Feb 22, 2008
  • #16
i'd just save your money for the blower. the stock cobra engine is a stout little performer.

as for racing the guy, i think it will be close, but you'll definitely have a good chance. if you get the blower, you'll smoke him.
 
V

viridionplague

New Member
Oct 8, 2007
98
1
0
Feb 22, 2008
#17
  • Feb 22, 2008
  • #17
well i dont have the $$4500 for the blower i want lol, and id rather get the heads off and take a look at the pistons before i get the blower on the stock bottom end.

i just got back from the machine shop, the guy said about 5-600 for the port work and valve job and stuff, throw in another 120 for valves and w/e for a cam and it should be a nice gain for around 8-900 bucks instead of spending 1600 for afr's and a cam
 

RIO5.0

15 Year Member
Feb 16, 2001
6,892
8
128
N.H.
Feb 22, 2008
#18
  • Feb 22, 2008
  • #18
95 LT1 is in the high 13s stock...My neice has one with a chip, 5spd and exh and it runs 13.5 13.2... youll need some sack to hang with him...
I have the mods in my sig and can just hang with my neice... good luck.. those Z28 come on hard mid track...
 
9

91foxbod50

Member
Sep 26, 2007
486
0
16
Feb 22, 2008
#19
  • Feb 22, 2008
  • #19
I had a 95 lt1 trans am with an M-6. Car was real quick but once it would heat up it was a dog. So do what you will with that info, imo you might take him from a dig t/a has about 320 tq. But like I said above, when it heats up it's a DOG.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Feb 22, 2008
#20
  • Feb 22, 2008
  • #20
*At the track*

Stock for stock, the lt1 gets a slight edge.

From what you say, you can take him if you outdrive him.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Progress Thread Progress Thread- From6to8's 1994 Cobra Supercharger install
  • from6to8
  • Sep 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 20 21 22
Replies
420
Views
9K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
Hello from California - Fox Body
  • gkomo
  • Aug 2, 2024
  • The Welcome Wagon
Replies
16
Views
1K
The Welcome Wagon Sep 25, 2024
SoulN
S
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
Which one of these 3 intakes make the most sense for my 331 combo
  • from6to8
  • Jul 25, 2024
  • 1994 - 1995 Specific Tech
Replies
7
Views
2K
1994 - 1995 Specific Tech Jul 26, 2024
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?