Progress Thread Tannerc91gt’s Build(s) Thread

FoxMustangLvr · Dec 14, 2016

Davedacarpainter said:

I didn't say there wasn't any, just very little.

FoxMustangLvr said:
since there's really very little "build worthy" going on

Yours does count since you are quiet literally building two t-top cars, outside of that it's just people with rattle can paint jobs and new head/tail lights. Hopefully Chuckman can get some updates going soon too. I love me a smooth & tucked engine bay

Noobz347 · Dec 14, 2016

Now I've seen some budget builds before but....

C'mon man. At least throw a couch cushion or something in there.

tannerc91gt · Dec 14, 2016

Noobz347 said:
Now I've seen some budget builds before but....

C'mon man. At least throw a couch cushion or something in there.

Seat covers are on the list! But $100/ea for something that doesn't make it run is far down the list right meow.

tannerc91gt · Dec 14, 2016

Local racer changed his setup and I was able to score the $500 fuel pump I've been wanting for $250

every little bit helps at this point.

Noobz347 · Dec 14, 2016

tannerc91gt said:
Seat covers are on the list! But $100/ea for something that doesn't make it run is far down the list right meow.

It's my job to point out the obvious low lying fruits.

tannerc91gt · Dec 14, 2016

Noobz347 said:
It's my job to point out the obvious low lying fruits.

Everyone's good at something

tannerc91gt · Dec 14, 2016

Man I'm excited about this thing. You'll have to excuse the bumper and fender are only half ass attached but I got it back on the ground to try out the seat and seeing it mostly back together is good motivation.
I like the cervini but I almost wish I had a stock flat hood for it.

Noobz347 · Dec 14, 2016

tannerc91gt said:
Everyone's good at something

My mother says I'm special.

Davedacarpainter · Dec 14, 2016

Noobz347 said:
My mother says I'm special.

I think we all would agree that you are special Noobz.

Sick__fox · Dec 15, 2016

Tannerc91gt I pm you bud

Noobz347 · Dec 15, 2016

Sick__fox said:
Tannerc91gt I pm you bud

It's about putting that weird motor in the car, huh?

We've told him about it. I'm not sure he reads good.

Welcome aboard BTW.

Sick__fox · Dec 15, 2016

Noobz347 haha no man. It was about the nrgsteering hub. I can't seem to get mine to fit. Wanted some pointers. Thanks for letting me be apart of stang net.

tannerc91gt · Dec 16, 2016

Collin spotted this but I thought some others might be interested to see my old cobra finished up. I miss the car for sure, it was the single nicest vehicle I've ever owned. Pretty happy with what I've got going now but it's a little bittersweet to see it done.
I like most of what he did with it, or the shop that built it I guess.

tannerc91gt · Dec 21, 2016

Started on the fuel system tonight. Removed all the summit/Jegs generic fittings and replaced them all with new parts from Fragola (except the Y block pictured). Night and day difference between the fittings in terms of quality and ease of installation.

Magnafuel 4303 fuel pump that I picked up last week.

I got the regulator mounted to the rail and got everything forward of the firewall cut and installed. Will mount the pump and reinstall the fuel tank tomorrow more than likely.

Also hacked at the MS harness a bit and moved the coil pack brackets off the intake. I picked up 36" extension harnesses from Painless so I can extend them out in the wheel wells. You can see the colored wiring in the top corners of the picture. Need to find somewhere that sells something similar whatever loom/wrap the harness is wrapped in.

Having a somewhat hard time finding materials to build the downpipes which is frustrating. Will be building them out of 16ga mild steel. Everything I'm finding is aluminized which id prefer not to use. I've heard that id have to grind off the coating or it isn't very TIG friendly. Not sure there. Need to find a couple tight 180* radius bends as well as a couple L shaped 90*s.

I ordered the stock length outlaw lower valance which should be here in 3 weeks give or take.
I liked the idea of the cobra extensions but for nearly no extra cost I think the fender exit exhaust will look better and it eliminates the fog light holes. Hopefully it looks as good as I'm picturing it

a91what · Dec 21, 2016

I tigged the aluminized tubing just fine. Hit it with a wire wheel first.

hoopty5.0 · Dec 21, 2016

Mandrelbends.com doesn't have anything?

CarMichael Angelo · Dec 21, 2016

Ok,....if you're gonna insist showing me pictures of your shiny engine in that perfectly smoothed engine bay, You're gonna have to turn off the lazyometer and remove the fugly that is sticking all out of the firewall.
What
the
hell?

Summit has every form of bend you'll need in different bend radiuses from several suppliers.

Noobz347 · Dec 21, 2016

How much farther should we let him get before we tell him that his headers are on backwards.

tannerc91gt · Dec 21, 2016

madmike1157 said:
Ok,....if you're gonna insist showing me pictures of your shiny engine in that perfectly smoothed engine bay, You're gonna have to turn off the lazyometer and remove the fugly that is sticking all out of the firewall.
What
the
hell?

Summit has every form of bend you'll need in different bend radiuses from several suppliers.

They've got about 2 bends that aren't stainless or aluminized.
Are you referring to the heater core lines? I tell myself I'll hook the heatercore back up some day which i probably never will. But really I just don't like the open holes it leaves in the firewall and I'm not sure I've seen a block off plate that's more than a piece of aluminum riveted to the firewall.

I'd remove it if I could find a nice solution

tannerc91gt · Dec 21, 2016

hoopty5.0 said:
Mandrelbends.com doesn't have anything?

I'll have to check. Just being stubborn probably

Edit: $150 got me covered, thanks for the tip

Progress Thread Tannerc91gt’s Build(s) Thread

I love my Pimp

Stangnet Facilities Maint Tech... Er... Janitor

This last 25% is foreign territory at this point

This last 25% is foreign territory at this point

Stangnet Facilities Maint Tech... Er... Janitor

This last 25% is foreign territory at this point

This last 25% is foreign territory at this point

Stangnet Facilities Maint Tech... Er... Janitor

Chicks can make things hard if they’re inspired...

Member

Stangnet Facilities Maint Tech... Er... Janitor

Member

This last 25% is foreign territory at this point

This last 25% is foreign territory at this point

SendMeUrDataLog

mechanicus terribilis

my rearend will smell so minty fresh,

Stangnet Facilities Maint Tech... Er... Janitor

This last 25% is foreign territory at this point

This last 25% is foreign territory at this point

Similar threads

Privacy & Transparency

Privacy & Transparency