The Official MACn89blckstng Progress Thread

MAC'n89Blckstng · Jan 12, 2009

customfabwork said:
Looks great man. I like how you did your radiator support, a little different than we did, but it still looks great. I think your right, it does look a little more proportional to everything else. We went with 1.5 tubing just because of the other bars in the engine bay.
The dash project is looking good. good to see some nice fabrication. +1 on using the sn door panels. think it would look a little funny with the fox panels, mainly because of the location of the door handle. but looks really good. if i was a little closer to ya, i would give you a hand if you ever needed, but indiana is a little far of a drive. if i only was rich and had a private jet. well anyways keep up the good work

Thanks! I wasn't going to do the door panel thing but my friends (who have been alot of help on keepin me goin on the project) convinced me to just bite the bullet and do it. I got a set of white 7up door panels for 30 bucks off the bay to hack up and attach the SN section onto and then foam and fiberglass it to look pretty. That would be sick to get some of your work into my car. I HATE other people working on my cars because I dont trust them but after seeing your car I'd have to say you can work on my car any day!

SVT32VDOHC said:
No problem. Everything looks like it's going along great. The 94+ heater box will fit no problem. You'll see where you have to make some changes to the way it bolts up and being that your car is newer than my 81....you might not have to modify the firewall for the heater and ac hoses/tubes to go through. The 81 firewall needed some modifying done...more than what an 87+ firewall looked like. Just make sure nothing rubs. I put that black door edge protecting trim on the firewall where the heater core hoses and a/c hoses went into the car. Cheap insurance!

yea the 98 box fit perfectly, I actually get to shave the one hole in the firewall because the 98 box only uses one. The only thing Im going to have to do is "massage" the heater core tube a bit so the box fits all the way in place.

1990Coupe said:
I had no idea you were doing an SN dash swap.. Looks awesome man!!!!

I wasn't going to do it until I got a sick deal on a wrecked 98 GT that I got for 400 bucks. I sold the trans and some other stuff and already made my money back on it.

I'm going to be going to the E-town swap meet to try and sell some more crap and fund this project. I'm hoping that I will be driving it by mid summer. I'm keeping my fingers crossed.

Thanks for all the comments guys! We all know you guys are half the inspiration for keeping our cars coming out like they have been!!!

1990Coupe · Jan 12, 2009

MAC'n89Blckstng said:
I wasn't going to do it until I got a sick deal on a wrecked 98 GT that I got for 400 bucks. I sold the trans and some other stuff and already made my money back on it. I'm going to be going to the E-town swap meet to try and sell some more crap and fund this project. I'm hoping that I will be driving it by mid summer. I'm keeping my fingers crossed.

Thanks for all the comments guys! We all know you guys are half the inspiration for keeping our cars coming out like they have been!!!

I'll have to look for you there. When you get your location at the swap meet PM me and i'll stop by

MAC'n89Blckstng · Jan 12, 2009

Sounds good to me man! Know anybody thats ever sold stuff there? I'm hoping its not gonna be a waste of three days!

Chrome_Rust · Jan 12, 2009

I am in process of doing the dash swap in my 93. i want to do the door panels too, but i know my skills at fiberglass, bondo, and sanding.... well i have none.

View Gallery - FQuick.com

this is the car i gathered my insiration from...

i wish you luck!
Charlie

1990Coupe · Jan 12, 2009

MAC'n89Blckstng said:
Sounds good to me man! Know anybody thats ever sold stuff there? I'm hoping its not gonna be a waste of three days!

When i was building my car over the summer/fall, i was going to C&H in jackson every weekend. They go to the meets every spring/fall and always do well. Except this fall it rained and nobody did good.

1990Coupe · Jan 12, 2009

Also - How do you plan on wiring up the gauges to work????

I may consider doing this some day.. I would leave the Fox door panels though. SVT32v left his fox door panels and it worked just fine for him.

MAC'n89Blckstng · Jan 12, 2009

Chrome_Rust said:
I am in process of doing the dash swap in my 93. i want to do the door panels too, but i know my skills at fiberglass, bondo, and sanding.... well i have none.

View Gallery - FQuick.com

this is the car i gathered my insiration from...

i wish you luck!
Charlie

I also used his website for some tips and am doing my door panels the exact same way he did.

1990Coupe said:
Also - How do you plan on wiring up the gauges to work????

I may consider doing this some day.. I would leave the Fox door panels though. SVT32v left his fox door panels and it worked just fine for him.

I'm using a cluster from a 95 GT and from what I've heard, they wire up color to color from with the fox wiring. We'll see I guess. lol

1990Coupe · Jan 12, 2009

MAC'n89Blckstng said:
I also used his website for some tips and am doing my door panels the exact same way he did.

I'm using a cluster from a 95 GT and from what I've heard, they wire up color to color from with the fox wiring. We'll see I guess. lol

I'll be watching your project to see if this is true and the colors match up.. its something i'd do one day!!!!

MAC'n89Blckstng · Jan 12, 2009

we will see. I'm hoping its not going to be too hard/complicated. I'm going to get the wiring diagrams for the 98 and the 89 and go from there. I'm going to be installing a push button start into the car as well. Its gonna be like the ones from the S2000's. I always loved it and once I used it to start the Ford GT I drove and started up a rumbly V8 with it I was hooked.

Chrome_Rust · Jan 12, 2009

MAC'n89Blckstng said:
I also used his website for some tips and am doing my door panels the exact same way he did.

Would you consider doing another set? I have Money!

MAC'n89Blckstng · Jan 13, 2009

I would if I didn't have MY car to work on. lol The thing is that since the dash swap is custom fit to every car, my door panels would fit on my car but they may not fit on another. You would have to mock them up and attach them where you need them and then ship them to me to do the body work on them.

82CapriRS · Jan 14, 2009

if only we all were able to do this i dont think you would see many fox's with stock dash/console an door panels. one day i might be abel to try this but not anytime soon. id take the dash out an then get pissed because i wouldnt know where to start ha. lemme know when your workin on it id like to watch you work your magic, maybe ill learn a few things bout body work an whatnot. i have a pretty good digital cam i can take some detailed pics for your build up. OH, ......ill bring my car so you can do a lil on there for me haha.

MAC'n89Blckstng · Jan 24, 2009

UPDATE:

I finally finished the body work up on the engine bay and got it in prime. I also got my rad mocked up and welded in the mounts. Its a pretty solid set up and am happy with it. My buddy gave me the idea and I think it was a pretty damn good one. The engine bay should be painted in the next two weeks and the engine should be in about a month or so.

satanas · Jan 24, 2009

Nice Idea on the radiator.. Looking awesome...!!

MAC'n89Blckstng · Jan 24, 2009

Thanks! I wasn't sure what to do but my buddy came up with the idea real quick. My grommets are actually the ends of valve stems that I cut off. The rad is really solid in there. I have my MSD 6AL-2 box coming in this week so I'm gonna mock that up before I paint it so thats ready to go. I can't wait to shoot some paint on this puppy! I also just ordered my drag springs so now I have all my front end components ready to go so once the bay is painted I can go ahead and install my QA1 k member and new control arms. I'm FINALLY seeing some really good progress going on this car. I did start the engine bay last April an all lol.

MAC'n89Blckstng · Jan 31, 2009

After 8 LONG months of wondering how its going to look and countless hours of sanding and blocking and sweating and cursing ITS FINALLY PAINTED!!!!!! I'm in awe about it, I can't believe its painted and that its MINE!!! Here are about 50 pictures of the process. Enjoy!!!

MSD 6AL-2 and MSD Blaster Coil Mocked up

Wet sanded and all prepped up and ready to go as of 12:30 am last night.

SPRAY DAY!!
1 coat of DTM Epoxy Primer Sealer

3 coats of Competition Orange for two tone break.

Brought two tone to the back of the hood as well.

Taped off and sprayed the silver for the bottom. 3 coats of Volkswagon Reflex Silver. One light coat of blue pearl coat was laid on it in hopes that at night it will have a blue hue.

Paper removed and waiting to tape off to spray the black.

Taped off bottom and sprayed 3 coats of modified Honda Nighthawk Black (substituted the violet pearl in the mix with more blue pearl)

I did an experiment with regular black with a blue pearl coat over that on the valve covers but came out too dark bluish so I resprayed them.

Tape removed and ready for clear!

Three coats of Nason Selective Clear.

MAC'n89Blckstng · Jan 31, 2009

Looks black in some light.....

Then it shines with blue pearl.

Let me know what you guys think!

QUICK91LX · Jan 31, 2009

Like I said when I just talked to you...It's a work of art! This car is going to win Fox of the Year as soon as it's done!

MAC'n89Blckstng · Jan 31, 2009

That would be nice. I hope to go to some shows and get something. I'm DYING to drive this thing. It aint perfect and the mods aren't the best out there but I'm just trying to make the best with what I've got.

1991notchbackLX · Jan 31, 2009

good Lord that is a gorgeous piece of machinery, awesome work man, i'm beyond impressed

The Official MACn89blckstng Progress Thread

MAC'n89Blckstng

Active Member

1990Coupe

MAC'n89Blckstng

Active Member

Chrome_Rust

Member

1990Coupe

1990Coupe

MAC'n89Blckstng

Active Member

1990Coupe

MAC'n89Blckstng

Active Member

Chrome_Rust

Member

MAC'n89Blckstng

Active Member

82CapriRS

New Member

MAC'n89Blckstng

Active Member

Attachments

satanas

Member

MAC'n89Blckstng

Active Member

MAC'n89Blckstng

Active Member

Attachments

MAC'n89Blckstng

Active Member

Attachments

QUICK91LX

MAC'n89Blckstng

Active Member

1991notchbackLX

Active Member

Similar threads

The Official MACn89blckstng Progress Thread

Active Member

Active Member

Member

Active Member

Active Member

Member

Active Member

New Member

Active Member

Attachments

Member

Active Member

Active Member

Attachments

Active Member

Attachments

Active Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency