Third Dyno attempt 4-29-11

[Pops Fun]

Hi
My third trip to try and dyno this year... New Maf, new fuel system......
Think I am ready this time

Old post 3-22-11
http://www.stangnet.com/mustang-forums/834464-back-dyno-3-22-a.html

Will I finally get a number Friday??? Who knows, think I have done my part.
Hoping for over 550rwhp..
Made 507 before Vortech pulley change,,, Water/Meth change... MAF change,,, Fuels system change...
Setup
4/29/2011
347 Ci
Dart block SHP
8.5 to 1 Compression Ratio
Dyno Tuned Moates Chip
TFS TW Heads ported
Cobra Intake ported
Intake Spacer 1/2 inch
Vortech V-2 SQ With 2.85 Pulley
Anderson Power Pipe
Maxflow bypass valve
Snow Water Meth 2 Stage
65mm T/B
SCT Big Mouth BA 3000
60# injectors
H&S 1.72 Roller Rockers
MSD 6al
Glenns Performance fuel rails
Glenns Performance Dual Walbro sys
JBA ceramic coated Shorty Headers
Dynomax Ultra Flo SS Exhaust
Spec 3+ Clutch
TKO 600

 

[BlackVert]

good luck! i hope your tranny doesn't explode or something. as they say ... it's only as strong as the weakest part. big power tends to uncover all the weaknesses in the system eventually.

 

[4Jenna]

Good luck!!

 

[RIO5.0]

Give er some.....

 

[ProKiller]

I love how fast you are getting shot down at the dyno, then circling the wagons and come back out swinging. makes me feel like a bum for not getting my arse in gear.

 

[Pops Fun]

I love how fast you are getting shot down at the dyno, then circling the wagons and come back out swinging. makes me feel like a bum for not getting my arse in gear.

Thanks... I think...

Maybe the 4th will be the charm. Think my computer took a dump.... or it's something else.... Like there software

Confused and frustrated ... about ready to take it to the crusher. Can't sell it. I'd be ripped apart if I saw it on the street running good....

going back monday 9am with my son's computer....

 

[BlackVert]

time for a carb conversion. talk about simple tuning

 

[Pops Fun]

Hi
Tightened all the blower hose connections.. ?? Found the MAF was cocked and only connected by a 1/4 of an inch on one side,,, could be a problem?? But only during max boost???? Probably came lose when I had the new BOV put on... .