To everyone who wants.....

MikeROD16 · May 16, 2008

Ok, so whoever wants a simulated dyno run, i got the program dynosim. Ill gladly do it for you. but you will have to supply me the basics. and specs of your heads. and if you want extreme accuracy, i need detail. and i can also simulate a drag race to see your times. i can setup shift times, redline, what tranny you have, temp. outside, tires, etc.
just let me know. look at the pics i got of it.

http://s9.photobucket.com/albums/a93/tonito1961/DynoSim and DragSim/

I love the program. ITS AMAIZING!!! if by any chance you want it, ask away and give me your IM and i'll send it thru there.

Turkey Sammich · May 16, 2008

Can you dyno my seapeople

MikeROD16 · May 16, 2008

lol of course. it dynos EVERYTHING!!!! lmao

riceslayer302 · May 16, 2008

whatd that cost?

25thmustang · May 16, 2008

If it's like other programs it will tell me my junk should run mid 13s on street tires and low 13s on slicks...

MikeROD16 · May 17, 2008

riceslayer302 said:
whatd that cost?

i umm...well....lets just say i didnt pay for it. and i love the world of file sharing. lol. but yeah, to be honest, its extremely accurate. i put my cars stock specs and an ok shift time and typical weather etc. basically everything normal. and i got a 1/4 mile time of 14.5 and 0-60 in like 6.45. and hp was low 200. it was almost 220. and i saw the C&D article on my stang and it
was pretty damn close.

MikeROD16 · May 17, 2008

25thmustang said:
If it's like other programs it will tell me my junk should run mid 13s on street tires and low 13s on slicks...

nah lol, like i said, extremely accurate. these people dedicate themselves only to dyno and drag simultors.

25thmustang · May 17, 2008

I can almost assure you it wont match up... We have had a few of those things over the years, my brother and dad had them, and they always tell us our cars are slower than they should be.

Let me know exactly what you need to punch in and I will get it for my 89 and my brothers 86. Both simple combos...

Put the program to the test to see if it is accurate.

Dmarstroker · May 17, 2008

can you dyno this set up for me please:

347 CID

trickflow TW heads with 170cc intake runner size and 66cc on the exhaust
with a 61cc combustion chamber

274hr com cam 224 intake duration/232 exhaust .555 lift on the intake .565 on the exhaust

holley systemax II intake

30lb injectors

1 3/4 LT headers

2 1/2 inch exhaust

let me know if you need any more info

Dmarstroker · May 17, 2008

my bad I forgot to add something, can you also do that same combo except with a 190cc intake runner size and a 70cc size on the exhaust for the heads. I also forgot to add the compression ratio, 10:1.

MikeROD16 · May 17, 2008

(

awesome, ok this is the list i need.

-block
-bore
-stroke
-heads (will need airflow specs unless edelbrock heads 6007, 6025, 6037, 7716, 7728 or AFR 185's).
-Info needed for airflow

-compression ratio
-induction
-induction flow (cfm)
-manifold type (single plane high flow/strd flow, dual plane high flow/strd flow/high torque flow, tunnel ram strd design, tunnel ram custom, I.R., tuned port injection, sequencial-fire injection, or forced induction.)
-if its a blower, i'll need the brand and model of it.
-exhaust setup
-cam specs

Thats for the engine itself. now for racing specs

-vehicle weight
-auto or manual
-wheelbase
-weight on driving wheels (%)
-frontal area (sqft)
-Aero Drag Coefficient
-transmission type
-torque converter multiplier, speed, and slippage (only if auto DUH)
-rear drive ratio
-numbers of gears
gear ratios
-type of tires
-static tire diameter and width
-traction coef
-tire growth factor
-redline RPM
-Shift time
-Rollout
-Rpm at launch
-rpm shifting from 1>2 and through the rest of the gears.
-weather (Temp., humidity, wind speed, equivalent elevation.

quite a few things you need to get lol. good luck

MikeROD16 · May 17, 2008

Dmarstroker said:
my bad I forgot to add something, can you also do that same combo except with a 190cc intake runner size and a 70cc size on the exhaust for the heads. I also forgot to add the compression ratio, 10:1.

look at the list i posted, give me the info there.

ChromdOutDubs · May 18, 2008

I got this software also: Drag2003 and Dyno2003, its not so accurate when i did it with mine. Like 25th said its tells you that your slower than it really is. Oh well, its a neat program to mess around with to waste some time, lol.

-AJ

MikeROD16 · May 18, 2008

still, its pretty good estimate

riceslayer302 · May 30, 2008

whered you get it? limewire? whatd you search for? drag 2003? dyno 2003? will it run on a mac?

MikeROD16 · May 30, 2008

what i did was go to torrentscan.com then look for dynosim. there will be a download for dynosim2003. download that. it will be like a few KB. open that file with limewire and itll start downloading it. I have a mac, and i downloaded a program called crossover. Basically lets you run actual windows programs on mac.

ChromdOutDubs · May 30, 2008

I got it from Demonoid, which is a private torrent site. I searched for Dyno2003 which included Drag2003 also...

-AJ

Aliate X · May 31, 2008

ChromdOutDubs said:
I got it from Demonoid, which is a private torrent site. I searched for Dyno2003 which included Drag2003 also...

-AJ

dude you built the sickest ****ing car on this website just so you know

ChromdOutDubs · May 31, 2008

Aliate X said:
dude you built the sickest ****ing car on this website just so you know

Thanks man, there are tons of guys with nicer cars than mine, so that means a lot to me. Its broke right now, have to get the tranny fixed, and maybe putting a new cam in it.

-AJ

Aliate X · Jun 1, 2008

it just looks really freakin good with the rear tires and all, it sits really nice

To everyone who wants.....

Member

I can't fap normal. I cracked a rib, then my ankle

Member

Banned

Mustang Master

Member

Member

Mustang Master

Member

Member

Member

Member

Member

Member

Banned

Member

Member

Member

Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency