TwEECer guys post here, I need help with Timing (Spark)

[Slow5.0]

I was tryin to get 34 total timing (spark on tweecer) at WOT , but the best I can get is 29, I set spark_qlobal_adder at 4 (14*) and I didn't mess up with spark tables , so do anybody know how I can get 34* timing at WOT

BTW I just fix my laptop 2 days ago (bad hard drive) and new here we go again with tunes

 

[GTJake]

Go to the high load tables in the base spark table and change it to 34* on the top end.

Jake

 

[95YellowGTbeasT]

globak spark adder doesnt do anything in less you have spark multiplies to 0 and if you do that then you will only have 4* total timing you use the sprk adder to figure out what you can have in the timing table, for example if you wanted to see if you could have 32* timing in the upper loads set sprk multiplier to 0 and sprk global adder to 32 and then you will have 32* timing, if it knocks turn it down if not turn it up. The only way to add timing is the sprk tables.

Nick

 

[Slow5.0]

Well I played little bit and I got 38 , so I didn't want to drive anymore with that so I switced whole calibration file with Daren Woodall's from his site
http://home.austin.rr.com/dwoodall/DW003-2.CCF and Stang is kinda slow with that tune plus it start pinging in 5th at low rpms
BTW he using J4J1 ,I like to use T4MO

 

[Slow5.0]

So can I set same spark # in spark_base_table and spark_altitude_table and can I set to all 55s in spark_MBT_table and spark_bdln_table or in just MBT