TwEECer guys post here, I need help with Timing (Spark)

Slow5.0

Active Member

Feb 13, 2003

2,554

0

46

Portland, OR

Oct 4, 2004

#1

• Oct 4, 2004

• #1

I was tryin to get 34 total timing (spark on tweecer) at WOT , but the best I can get is 29, I set spark_qlobal_adder at 4 (14*) and I didn't mess up with spark tables , so do anybody know how I can get 34* timing at WOT

BTW I just fix my laptop 2 days ago (bad hard drive) and new here we go again with tunes

 

GTJake

Founding Member

Oct 28, 2002

3,049

0

56

Ann Arbor, MI

Oct 4, 2004

#2

• Oct 4, 2004

• #2

Go to the high load tables in the base spark table and change it to 34* on the top end.

Jake

 

95YellowGTbeasT

New Member

Mar 4, 2003

605

1

0

South Carolina

Oct 4, 2004

#3

• Oct 4, 2004

• #3

globak spark adder doesnt do anything in less you have spark multiplies to 0 and if you do that then you will only have 4* total timing you use the sprk adder to figure out what you can have in the timing table, for example if you wanted to see if you could have 32* timing in the upper loads set sprk multiplier to 0 and sprk global adder to 32 and then you will have 32* timing, if it knocks turn it down if not turn it up. The only way to add timing is the sprk tables.

Nick

 

Slow5.0

Active Member

Feb 13, 2003

2,554

0

46

Portland, OR

Oct 4, 2004

#4

• Oct 4, 2004

• #4

Well I played little bit and I got 38 , so I didn't want to drive anymore with that so I switced whole calibration file with Daren Woodall's from his site
http://home.austin.rr.com/dwoodall/DW003-2.CCF and Stang is kinda slow with that tune plus it start pinging in 5th at low rpms
BTW he using J4J1 ,I like to use T4MO

 

Slow5.0

Active Member

Feb 13, 2003

2,554

0

46

Portland, OR

Oct 5, 2004

#5

• Oct 5, 2004

• #5

So can I set same spark # in spark_base_table and spark_altitude_table and can I set to all 55s in spark_MBT_table and spark_bdln_table or in just MBT