Fox V8 Swapped 4cyl Car Suspension???

To get my strange struts/mm coil over springs to fit on the front I had to have a machine shop mill off the stock spindles(86 GT-which are the same as the later 4cyl cars). You can go that way(cheaper) or buy some spindles. But if buying spindles you might as well start looking for some 5 lug versions and convert everything over.

As far as rear suspension goes there isn't any differences between the two. Just purchase quality pieces from a good vendor. I like maximum motorsports,TeamZ motorsports,UPR,etc. If you are a drag racer at all,you can even keep the 4 cyl springs. I would swap them out for a performance lowering spring if you want it to handle(Eibach,steeda,FRPP,TeamZ,all have some good products). Struts and shocks need to be matched to your preferred driving style. Adjustable examples are nice but more budget pieces like KYB are ok for street driving. Add some good bushings,swaybar links,etc. Just remember that these cars tend to be a little rough riding anyway but can be tailored to your needs.

Oh and if you haven't done it add some subframe connectors and torque box reinforcements.

Fox89Coupe said:

Already has subframe connectors. It's more less going to street cruiser and a Lil tack use. But I want it to ride good. I know it's not gonna ride like a cadillac.

Click to expand...

Strange Struts/ Shocks are adjustable to make the car ride as soft or hard as you would like....

There are slightly cheaper options but Strange is the best bang for the buck.

You'll need the Spindles, rotors, and brake calipers (which are bigger). If the pedal feels soft look at changing the Master cylinder to the GT, Cobra, or SVO version.

Look for a stock set of V8 springs (LMR) people around your fox community probably will give them away or sell cheap.