I bypassed my smog without a pulley and have no issues. There is a specific belt AND idler pulley you use and it works flawlessly. There will be enough tension on the belt without it squeaking! I'll get part numbers for you tomorrow. It's a b**ch getting the belt on, but it works nicely.
All the folks I've ever seen get the smog delete pulleys have had them only last a couple years before the bearings wear out.
Sry, forgot to get the info.
Here's what I did, I bought 2 Dayco part#89006 idler pulleys, I used one for the upper idler pulley and one on the tensioner. Then I used a 85.5" belt. The pulleys were 18 bucks each and the belt was 30 I believe.
I've tried those smog pump elimination pulleys in the past and they tend to fail rather quickly. You buy these pulleys here and you won't have to worry about replacing them for at least 10 years. Also you get to clean up the smog pump area by not having anything down there.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?