• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

Went to install the JLT I bought from a board member and... :(

  • Thread starter Thread starter 95.0Stang
  • Start date Start date May 31, 2009
Status
Not open for further replies.
  • 1
  • 2
  • 3
Next
1 of 3 Next Last
9

95.0Stang

Member
Feb 20, 2003
538
1
18
Kansas
May 31, 2009
#1
  • May 31, 2009
  • #1
I bought this from a board member several months ago and just never had time to do anything with it, went to install tonight, but was disappointed it was broken. I decided to email JLT with the following message...we will see what happens.


I know I did not buy this directly from your company, but it is a JLT Performance part I bought from another guy who decided to go a different route with his car several months ago. I never even opened the box until today, I work in finance and this industry is going downhill fast as I am sure you have heard.

Anyhow I finally opened the box to install the CAI tonight and I was HIGHLY disappointed to find the following:
View attachment 255935
View attachment 255936
View attachment 255937
View attachment 255938
View attachment 255939

This is for #CAI-FMG-9604

I am NOT asking for a refund or any special treatment, I am simply asking you to replace this tube as the system is absolutely useless as is. In my view this is a manufacturing issue.

Please let me know what we can do ASAP!

Thank You,
Jared
 

BlownStangGT

REPEAT
Founding Member
Jan 22, 2002
3,860
6
58
Lancaster, PA
May 31, 2009
#2
  • May 31, 2009
  • #2
So when you got the item from the previous owner you didnt open the box to look at it at all? Not sure what JLT will do, they are a good company, but I would think one would open the box to make sure the parts are ok when you recieve them right away.
 

Silverstang02GT

New Member
Sep 30, 2002
60
0
0
Ft. Myers FL
May 31, 2009
#3
  • May 31, 2009
  • #3
I know I like to open the box right away when I get new stuff. I'm very impatient. I don't know why they wouldn't send just a replacement tube. that would be good PR. but who knows stranger things have happened
 

Brute03

Member
Mar 20, 2006
232
0
16
May 31, 2009
#4
  • May 31, 2009
  • #4
you've had it for months and haven't looked at it once? anyway, a little JB weld and it should be good as new because i doubt they will send you a new one
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
May 31, 2009
#5
  • May 31, 2009
  • #5
I too find it hard to believe you never checked the contents of the box when you recieved it.

If I were you, I'd just expoxy it back together and consider it lesson learned.
 
9

95.0Stang

Member
Feb 20, 2003
538
1
18
Kansas
Jun 1, 2009
#6
  • Jun 1, 2009
  • #6
Honestly I got it in February or the start of March, it was COLD out still here in Kansas and I was having some medical issues also so I put it aside and never opened it, the first time thats ever happened. I am typically the one that gets something in the mail and has it on the car in 24-48 hours, but afterputting it aside I forgot about it for the most part.

Just to be clear I am in no way blaming the board member...I am blaming JLT, NO intake should do this, and thats just common sense, there really is NO excuse for this at all whether it happened at the factory or in shipping makes no difference, I open the box and remove the wrapping around the tube and it falls apart in my hand, and NO I AM NOT A FREAK STRENGTH TRAINER!!! LOL

All I am asking for is that one tube and they can have this one back, I dont see the problem and if I made the tube I would have no problem standing behind them.
 

Silverstang02GT

New Member
Sep 30, 2002
60
0
0
Ft. Myers FL
Jun 1, 2009
#7
  • Jun 1, 2009
  • #7
the tube alone cant cost them that much so they should send you one. like I said it would be good PR. then you would tell us how cool JLT is and they took care of you and all of stang net will order from them then.
 

Pearl02

Member
Nov 27, 2004
496
0
16
Kansas City
Jun 1, 2009
#8
  • Jun 1, 2009
  • #8
I bought a kit from JLT. After running it on the car for several months the tube had a crack in it. I emailed them with pictures of it. They quickly sent me out another one. They are a great company to work with. They told me to keep the old tube. Good luck with it. Pearl02.
 

V_Eight

Founding Member
Sep 5, 2002
617
1
0
ATL
Jun 1, 2009
#9
  • Jun 1, 2009
  • #9
I wouldn't send you an empty box let alone one with a new tube in it. Just glue it together and check your used parts when you get them next time.
 

COBRA90GT

Mustang Master
Sep 22, 2001
6,654
0
87
HOCKEYTOWN ® , MI
Jun 1, 2009
#10
  • Jun 1, 2009
  • #10
Man, some people are unbelievable...are you serious???
 

urban96

bubb rubb says:"woo woooooo"
Founding Member
Sep 24, 2002
3,464
1
69
Syracuse, NY
Jun 1, 2009
#11
  • Jun 1, 2009
  • #11
whats it made out of? plastic?
 
2

2000GTdriver

Member
May 27, 2004
47
0
6
Mile High City, Colorado
Jun 1, 2009
#12
  • Jun 1, 2009
  • #12
Duct tape
 
D

Drew0318

New Member
Aug 15, 2008
115
0
0
Chicago, IL
Jun 1, 2009
#13
  • Jun 1, 2009
  • #13
The UPS guy might as well be Santa. When I'm expecting something, I check the tracking data hourly until I see it's been delivered. Then I find an "excuse" to leave the office to run home and look at my new toys (could be anything from speakers to golf balls, to movies). One benefit of living 3 miles from work.


I don't think I'd have the willpower to wait more than 10 minutes to open it after getting home, much less a few months...
 

99RioRedVert

New Member
Feb 13, 2003
95
1
0
Chesapeake, VA
Jun 2, 2009
#14
  • Jun 2, 2009
  • #14
I don't see how JLT is responsible in any way here. The current owner cannot state whether the tube was mishandled by the prior owner or damaged in shipping. The current owner should get his money back from the previous owner but probably feels awkward doing so because so much time has passed.
 
3

302GTS

If you need herpes, I'm your man!
Apr 20, 2009
481
2
18
Largo, FL
Jun 2, 2009
#15
  • Jun 2, 2009
  • #15
While it doesn't seem like it'd be JLT's fault in this situation, from what I've heard they seem to be a very good company. As said before, that tube won't cost much at all. I know companies are real good with that kind of thing. This past Christmas, I ordered my mom a set of 05 and up sequential tail lights from American Muscle. I did something wrong apparently, and one of the harnesses wasn't working properly. American Muscle knew it was my fault, acknowledged what I did, yet still had a brand new set of two harnesses at my door the next day. Your letter to them is well written, and respectful, and I don't think they'll have any problems sending you a replacement tube.
 
D

Drew0318

New Member
Aug 15, 2008
115
0
0
Chicago, IL
Jun 2, 2009
#16
  • Jun 2, 2009
  • #16
While I agree that JLT shouldn't be responsible, I can't hardly fault the previous owner either.

Had it been opened/revealed it was broken when it was sent, yes, the seller should be willing to work on a solution. But given that it's been months, I don't see how they should be responsible for anything.


Unless the seller has the part returned and they go to JLT, which still isn't exactly right (moral).
 

twogts4us

15 Year Member
Apr 1, 2004
4,188
12
79
Dunedin, FL
Jun 2, 2009
#17
  • Jun 2, 2009
  • #17
Drew0318 said:
The UPS guy might as well be Santa. When I'm expecting something, I check the tracking data hourly until I see it's been delivered. Then I find an "excuse" to leave the office to run home and look at my new toys (could be anything from speakers to golf balls, to movies). One benefit of living 3 miles from work.


I don't think I'd have the willpower to wait more than 10 minutes to open it after getting home, much less a few months...
Click to expand...

DITTOS bro - I'm exactly the same way.

3 things -

#1 - JLT would be awesome if they did indeed replace the tube. Cheap for them and great PR...keep us posted. I'd love to hear the outcome.

#2 - I think your pipe was damaged in shipping. I truly doubt that is a manufacturer's defect. In your pics, the box doesn't appear to be too sturdy. I'm sure UPS dropped it from some frightening heights, then tossed bowling balls onto it. Happens all the time. Now if this were the original packaging from JLT, you probably stand a decent chance in receiving a replacement from them.

#3 - My lil story about PR and American Racing - I love their rims, but their PR does not exist. As some of you know, I had AR Torq Thrust 2's on my Black 02 GT, then I mounted them on my Mach. Awesome look, great quality wheels. BUT, when I bought them, they were listed on their website as SN-95 specific. Nowhere did they state that the wheels would not fit a Cobra, Bullitt or Mach due to the larger front brake calipers. On my 02 GT, I had the Cobra brake upgrade. I ended up adding MM spacers and ARP studs - a cost of about $170. On the Mach, of course, same size brake calipers, same issue. This time, without the fanciness of the calipers, I simply ground down the calipers for clearance, then painted em with black ceramic caliper paint.
So, what's my beef with American Racing? They simply didn't respond at all to 3 different emails and 2 USPS snail mails, the last sent certified. I wasn't even asking for a refund or anything of the sort. More than anything, I just wanted them to ACKNOWLEDGE the issue, make a FOOTNOTE on their website, and just RESPOND with some sort of verbiage.
I explained my story in detail. I enclosed a couple of pictures. I gushed about how sexy the rims are. What did I get in return? Not one word. Nothing. Zip. Zero. Nada.
To me, that's a death sentence. I'll never buy from them ever again.



Again, please keep us posted. (I'm in need of a new CAI and JLT is at the top of my list). Best of Luck!
 

Silverstang02GT

New Member
Sep 30, 2002
60
0
0
Ft. Myers FL
Jun 2, 2009
#18
  • Jun 2, 2009
  • #18
twogts4us said:
Again, please keep us posted. (I'm in need of a new CAI and JLT is at the top of my list). Best of Luck!
Click to expand...

And that is way JLT needs to help out. word of mouth on these forums. if they dont twogts4us might catch wind of it and decide to go with a different brand.

Edit:
V_Eight said:
I wouldn't send you an empty box let alone one with a new tube in it. Just glue it together and check your used parts when you get them next time.
Click to expand...

and if V_Eight ran JLT they would no longer be in business
 

urban96

bubb rubb says:"woo woooooo"
Founding Member
Sep 24, 2002
3,464
1
69
Syracuse, NY
Jun 2, 2009
#19
  • Jun 2, 2009
  • #19
i would lol if they sent him a roll of duct tape or some super glue
 

V_Eight

Founding Member
Sep 5, 2002
617
1
0
ATL
Jun 3, 2009
#20
  • Jun 3, 2009
  • #20
Silverstang02GT said:
and if V_Eight ran JLT they would no longer be in business
Click to expand...

Good thing I have my own business to run that has been in the green for three years now.
 
  • 1
  • 2
  • 3
Next
1 of 3 Next Last
Status
Not open for further replies.

Similar threads

M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
522
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
After a decade, I am no longer Stangless!
  • Jsmiley
  • May 27, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 1, 2024
manicmechanic007
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
New daily driver help needed.....not a mustang but mustang drivetrain.
  • Wayne Waldrep
  • Jun 17, 2024
  • Other Auto Tech
  • 3 4 5
Replies
80
Views
6K
Other Auto Tech Jul 28, 2024
manicmechanic007
TB Injection Install (Aces Killshot)
  • LILCBRA
  • Feb 5, 2024
  • 1974 - 1978 Mustang II Talk & Tech
  • 4 5 6
Replies
119
Views
21K
1974 - 1978 Mustang II Talk & Tech Dec 1, 2024
LILCBRA
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?