Progress Thread Project: Buried Under A Mountain Of Snow Black Hole Money Pit.

Getting her turned around for this weekend. Valve lash is still perfect! Compression is a low of 160 and high of 180 cold. Few sets of plugs gapped and ready to go.

But I gotta say the price of NGK plugs has gotten a tad out of hand. I remember when they were $1.59 a plug.
 

Attachments

  • 20231106_182311.webp
    20231106_182311.webp
    213.5 KB · Views: 101
  • Wow
Reactions: General karthief
Well got he all buttoned back up last night and tested the electric shifter again. Well something was wrong when trying to go on the transbrake. Well... this is a new one on race gas
 

Attachments

  • 20231107_165359.webp
    20231107_165359.webp
    109.8 KB · Views: 115
  • 20231107_165408.webp
    20231107_165408.webp
    101.9 KB · Views: 111
Welp... the bad fuel bit me again. Cleaned the nitrous plate spray bars yesterday before loading it up. Well something freed itself somewhere else in the system and clogged the bar again. So I got a dead hole... motor will be out here soon
 

Attachments

  • 20231112_125043.webp
    20231112_125043.webp
    91.4 KB · Views: 128
If you look on the driver side, you can see number 5 :poo:ting the bed.

But that pass was 1.19 5.30@130. We had more power out up front than we thought. But it is what it is. Motor will be out this weekend to see how bad it is
 

Attachments

  • FB_IMG_1699923178973.webp
    FB_IMG_1699923178973.webp
    82.9 KB · Views: 113
If you look on the driver side, you can see number 5 :poo:ting the bed.

But that pass was 1.19 5.30@130. We had more power out up front than we thought. But it is what it is. Motor will be out this weekend to see how bad it is
At least we got to hang out , I hate that’s how your day ended man.
 
Well... its bad... 4 pistons in total
 

Attachments

  • 20231118_133135.webp
    20231118_133135.webp
    150.2 KB · Views: 99
  • 20231118_133537.webp
    20231118_133537.webp
    127.7 KB · Views: 100
  • 20231118_140819.webp
    20231118_140819.webp
    344.6 KB · Views: 103
Damnit man. That’s gonna take a bite out of the wallet. You ever tried coated pistons? Buddy of mine runs two fogged stages on a 434 inch motor and I believe he runs Diamond pistons that are coated. Seems to help but when you miss the setup or some bull:poo: parts fails all kinds of hell can break loose.
 
Damnit man. That’s gonna take a bite out of the wallet. You ever tried coated pistons? Buddy of mine runs two fogged stages on a 434 inch motor and I believe he runs Diamond pistons that are coated. Seems to help but when you miss the setup or some bull:poo: parts fails all kinds of hell can break loose.
Yea we ran them in the turbo car... they are nice but when things go wrong the same :poo: happens
 
  • Like
Reactions: General karthief