help

  1. Nick Bos

    1970 Mustang Coupe Headers Question And Help

    Hello all, I have a 1970 ford mustang base with a stock 302. I'm thinking about getting some hooker headers (part # 6901HKR) or some shorty hedman headers (part #88400). I'm not sure if I should get the shorty headers or the long tube headers. Both say they are for the 1970 mustang 302 and are...
  2. Nick Bos

    1970 Mustang 302 Base Carb Question

    Hello all, I am thinking about purchasing a edelbrock 600 cfm carburetor (part number 1406). I'll be bolting it to the stock intake manifold that came with the original ford 302. The original carburetor was a motorcraft 2150, not sure if that helps. Anyways the question is if I need any gaskets...
  3. E

    Sn95.0 Wiring Harness Help

    Hey there, as you can tell I'm new to here. I wont bother you with telling you about me, lets get down to the nitty gritty. i have a 1992 BMW 325I sedan, i also have a 1995 SN95.0, with 32k original :) e36 chassis + sn95 5.0 you see where im getting with this? good. Engine is installed...
  4. W

    Foxbody Vibration At High Speed

    So this is my third post about this and I haven't fixed it yet. After a clutch job two summers ago I've had this horrible vibration at high speed not rpm dependent just speed dependent. We bought the flywheel from oreilys we changed everything but we did not change the pilot bearing or atleast...
  5. J

    Please Help Me!

    Hello guys, I'm new to this and it's my first time on a forum. I really need some help please... I just bought my first mustang. I'm super excited. It's a 2002 Mustang GT V8. 127k miles. There's an issue with it tho. When the mass air flow censor is plugged in, it idols ROUGH, and runs ROUGH...
  6. Nick Bos

    1970 Mustang 302-2v Carb?

    Hello all, Im wanting to rebuild my 2 barrel carburetor on my 1970 mustang coupe with a 302-2V. I'm having trouble identifying the carb. On the carb it says it's a motor craft and it looks like the original. But I'm not sure if it's an Autolite 2100 or a Motorcrafr 2150 carb. Do the rebuild...
  7. B

    Help! 99 Gt Intermittently Misfiring

    i have a 99 GT auto vert with about 125k miles. i bought the car in december of last year for dirt cheap (thing was leaking coolant bad, among other things). since then it's pretty much been a continuous project as it is my daily driver. I've been able to tackle most issues with it, but now i'm...
  8. Pruittracing

    Help 4.6 Engine Tick

    Hello I'm new here first post now about my problem I have a 2000 mustang gt with the 4.6 it has 144.000 I'm having a tick coming from the engine it's a constant tick that gose with the rpms it dose it anytime the engine is on need help don't know if this helps but it dose burn a little oil and...
  9. M

    Fox 1991 Mustang Gt No Start When Temp Is Below 50f. Need Help

    I have been playing with this Mustang for about a year. It runs great when the weather is warm. When the temp gets down to 50 or less, it refuses to start. It spins over fine. I can raise the hood and let the sun shine on it and it will start after it warms up a bit. I have taken a hair dryer...
  10. R

    94 Vert Gt Cobra Engine Plus Manual Swas Help

    What's up stang net peeps?! since the last time I posted here on stang net I've collected two more mustangs. a 94 V6 with an unfinished cobra engine and t5 swap that I have since pulled out and as of today dropped into a 94 mustang gt convertible with an auto trans. I pulled the Cobra out...
  11. T

    Sooo...now What

    Im pretty new to the mustang community, buying my 2004 v6 3.8L mustang just not even 6 months ago. So far I have a catback exhaust system, cool air intake, short throw shifter, stage 2 spec clutch, RAM billet aluminum flywheel, and some raxiom LED halo head lights. I really want to get this...
  12. jw3st0n

    Hello Everyone! (i Need Help)

    Hi, my name is Justin. I own a 2002 Sonic Blue New Edge Mustang GT. This is my third Stang. I've had it since July of last year. I need help with a PCM swap, But I'll start a different thread for that. If that's ok.
  13. A

    Trying To Find My Old Car.

    Hey guys, this is my first time logging in here since like 2010. I not sure if this is the right section but Im trying to find my old car, its 2009 GT prem manual , has the billet 18s and had a pioneer navi in it, also FRPP hot rod cams and steeda cai. I've made the mistake of selling it 6years...
  14. T

    Coolant Temp Sensor Stuck In Manifold Please Help

    Hi everyone, i cant get this coolant temp sensor out of my manifold, broke the top of it when i was replacing my intake manifold gasket. it wont turn and i tried everything from a socket(when one fit) to vice grips. and i cant seem to get it to turn. i even heated the surrounding metal and...
  15. Russell P

    2004 3.9 V6 Bad Engine Vibration

    I have been having some engine vibration for about a week now and I can't seem to figure it out. The whole engine shakes in idle and throughout the rpms (though it is worse around 1200 rpm). It also has a cough coming out of the back right tailpipe. There is also a rapid clicking type noise...
  16. L

    Need Help

    I have a 2002 mustang V6 automatic. 1 week ago I changed the alternator. The car was running fine for a few hours then just died while I was driving. The car would crank but not start. The lights worked et . Where the mileage usually is was dashes. After checking the wiring my boyfriend came the...
  17. S

    95 Stang Firing Hot And Getting Fuel But Won't Start

    I recently bought a 1995 mustang gt. Thought I'd found a cherry car, it's got 90000 miles and is in excellent condition, one owner which was an older lady. I buy it start driving it home, make it about 40 miles and it dies. After having it hauled home I start the hunt. No fire anywhere, gas to...
  18. Buddy Tucker

    1995 Power Windows Or Lack Of

    Hello everyone I just got a old 1995 mustang with a 3.8 now I am trying to fix all the problems it has and I am just stumped on this one In the drivers door there's no power to the window switches the door locks work and the passenger side door switch works the window fine but theres no power to...
  19. C

    Need Help

    My 2006 v6 mustang seems to have a little rattle or chirp coming from the engine behind the dashboard. This happens when I just start the car and when I accelerate. When I start the car it it's at about 1100 rpm then after 30 seconds goes down to 700 approx. Oil pressure is a tad high.The car...
  20. F

    Progress Thread Is This 1997 Mustang Cobra Worth It?

    I've been looking for a project car for a while but haven't had any luck finding one. Until I came across this 1997 Cobra. I don't know much about mustangs especially the cobras, this is actually my first time ever posting on any kinds of forums. If anyone could give there honest opinion about...
Top Bottom
Back
Forums
Menu