11 sec GT40 build....

srtthis · Aug 22, 2012

Already made 1 hit... 12.46@108

ViperPunk · Aug 22, 2012

thats a solid number right there already!

srtthis · Aug 23, 2012

ViperPunk said:
thats a solid number right there already!

yea i felt it was pretty good for only having 10* of timing in it. im going to try pushing base timing as far as i can and maybe try the timing locked to get the car to leave harder

ViperPunk · Aug 24, 2012

update with results asap when you get them!

Dino Dino Bambino · Aug 24, 2012

srtthis said:
Already made 1 hit... 12.46@108

Good start but I think you can get close to that on motor alone, so with the giggle gas 11's should be possible.

srtthis · Aug 24, 2012

Bullitt95 said:
Good start but I think you can get close to that on motor alone, so with the giggle gas 11's should be possible.

whatcha talkin bout willis??? that was on motor...

srtthis · Aug 24, 2012

Posi is toast so time for a spool

Dino Dino Bambino · Aug 25, 2012

srtthis said:
whatcha talkin bout willis??? that was on motor...

Uh OK. That's impressive. Must have been me who was inhaling too much giggle gas and yeah, some people have told me that I do look like Bruce Willis but I don't think so.

88LX5.Oh · Aug 25, 2012

Bullitt95 said:
Uh OK. That's impressive. Must have been me who was inhaling too much giggle gas and yeah, some people have told me that I do look like Bruce Willis but I don't think so.

Wrong Willis.

ViperPunk · Aug 26, 2012

you going mini spool or??

srtthis · Aug 26, 2012

Strange sells a package 35 spline axles c clip elems and a full spool. Not sure I'll go that route or 35s 9" ends and a full spool

ViperPunk · Aug 31, 2012

might as well do 9'' ends if it's in the budget right?

srtthis · Sep 12, 2012

Just pulled the diff out the one cone is completely trashed. So it's getting welded this week. Should be back to track soon

srtthis · Sep 24, 2012

hopefully i can get 2-3 more passes out of these
the passanger side that has been spinning from the burnt diff the splines are perfect!

i have 4 more axles in the garage but i cant run the radials with them since it will have the rear back to SVO width. so i could drive it just not race it.

srtthis · Oct 22, 2012

diff should be back in this week. things have been busy with race car and the house so i havent had much time to mess with my car.
plan on running on a 26" slick for these passes. nothing wrong with the 275 radials but the shorter slick shouldnt hurt the gearing like the 28" radial.

car is going to be roughly 75lbs lighter then the 12.46 pass

so let the guessing begin!

NIKwoaC · Oct 22, 2012

Somebody's been gettin' after it. Those factory axles?

srtthis · Oct 22, 2012

Me??? Never... Yea stock ranger axles

hoopty5.0 · Oct 22, 2012

Hmm....I'm anxious to see what it does. As for a guess....

12.46 best pass? Im going to guess low 12.20s under the assumption that since it's a little later in the year, it should be cooler, mixed with the shorter tires and less weight. 100lbs is good for a tenth, right?

srtthis · Oct 23, 2012

Yea roughly... Should be around 50* cooler also

f8tlfiveo · Oct 23, 2012

I will be at Cecil Friday night without my car. You gonna be down there?

11 sec GT40 build....

srtthis

the guy doing it does every local racers rear end

ViperPunk

Member

srtthis

the guy doing it does every local racers rear end

ViperPunk

Member

Dino Dino Bambino

srtthis

the guy doing it does every local racers rear end

srtthis

the guy doing it does every local racers rear end

Dino Dino Bambino

88LX5.Oh

ViperPunk

Member

srtthis

the guy doing it does every local racers rear end

ViperPunk

Member

srtthis

the guy doing it does every local racers rear end

srtthis

the guy doing it does every local racers rear end

srtthis

the guy doing it does every local racers rear end

NIKwoaC

中國製造

srtthis

the guy doing it does every local racers rear end

hoopty5.0

mechanicus terribilis

srtthis

the guy doing it does every local racers rear end

f8tlfiveo

My wife likes my spool and blow-off valve.

Similar threads

11 sec GT40 build....

the guy doing it does every local racers rear end

Member

the guy doing it does every local racers rear end

Member

the guy doing it does every local racers rear end

the guy doing it does every local racers rear end

Member

the guy doing it does every local racers rear end

Member

the guy doing it does every local racers rear end

the guy doing it does every local racers rear end

the guy doing it does every local racers rear end

中國製造

the guy doing it does every local racers rear end

mechanicus terribilis

the guy doing it does every local racers rear end

My wife likes my spool and blow-off valve.

Similar threads

Privacy & Transparency

Privacy & Transparency