11 sec GT40 build....

srtthis · Oct 23, 2012

nah leaving for smoke hole west virgina for the weekend...
shooting for next weekend

srtthis · Oct 24, 2012

This blows...
My rear won't hang low enough for some reason to fill using fill hole in girdle

NIKwoaC · Oct 24, 2012

srtthis said:
This blows...
My rear won't hang low enough for some reason to fill using fill hole in girdle

Three words: fluid hand pump.

srtthis · Oct 24, 2012

NIKwoaC said:
Three words: fluid hand pump.

I had one them that I used to fill it last time it didn't work to well. I was tempted to drop the shocks to let the rear hang lower

clement · Oct 24, 2012

do not use the fill hole in the girdle, use the fill hole in the housing. the fill hole in the girdle overfills it and gear oil will be coming out every orifice of that bitch if the vent doesnt blow it all over the underside of the car first.

Cory Berg · Oct 25, 2012

do not use the fill hole in the girdle, use the fill hole in the housing. the fill hole in the girdle overfills it and gear oil will be coming out every orifice of that **** if the vent doesnt blow it all over the underside of the car first.

That's why you pull the fill plug and fill till it comes out that hole...

clement · Oct 25, 2012

either way, you only fill it to the lower fill hole in front by the pinion, not to the up to the top hole in the girdle.

srtthis · Oct 25, 2012

im one of the guys that knows that it hold 2 quarts... and i put 2 quarts in it... i dont use the fill hole to make sure its filled.

srtthis · Oct 31, 2012

2 more days....

putting the street tires on it tonight to make sure everything is ok... then the radials will be bolted up.

srtthis · Nov 2, 2012

KABOOM! Went roughly 30ft and an axle let go... Oh we'll it was hauling some ass for those 30ft

Gearbanger 101 · Nov 2, 2012

Gonna stick another set of 28's in her and try again, or you gonna go with a 31-spline set up next time?

srtthis · Nov 3, 2012

Well I have a cobra diff on my work bench now... But I haven't ruled out 33s or 35s and a spool yet.

srtthis · Nov 5, 2012

BOOM!!!!

Gearbanger 101 · Nov 5, 2012

Nice break.

srtthis · Nov 5, 2012

I try

hoopty5.0 · Nov 5, 2012

Damn dude. Go big or go home!

srtthis · Nov 6, 2012

hoopty5.0 said:
Damn dude. Go big or go home!

pretty much how i do things

hoopty5.0 · Nov 6, 2012

Did it yank to one side when it let go?

Im scared Ill share the same fate when I go in a couple weeks.

f8tlfiveo · Nov 6, 2012

I did the same thing but mine snapped at the starting line..I don't think the car moved 1 inch...stock axles 5000rpm foot slip off the clutch and a well prepped track..boom..lol

srtthis · Nov 6, 2012

hoopty5.0 said:
Did it yank to one side when it let go?

Im scared Ill share the same fate when I go in a couple weeks.

not really but i had the clutch in as soon as i head the bang. lucky for me i had disk brakes on it to keep the axle in

11 sec GT40 build....

the guy doing it does every local racers rear end

the guy doing it does every local racers rear end

中國製造

the guy doing it does every local racers rear end

Active Member

the guy doing it does every local racers rear end

the guy doing it does every local racers rear end

the guy doing it does every local racers rear end

Straight Outta Locash

the guy doing it does every local racers rear end

the guy doing it does every local racers rear end

Attachments

Straight Outta Locash

the guy doing it does every local racers rear end

mechanicus terribilis

the guy doing it does every local racers rear end

mechanicus terribilis

My wife likes my spool and blow-off valve.

the guy doing it does every local racers rear end

Similar threads

Privacy & Transparency

Privacy & Transparency