11 sec GT40 build....

srtthis · Apr 20, 2013

GT40 head 61CC chamber 5 angle valve job by Rick 91GT
exploder intake ported lower by me upper is blended from inlet of the throttle body all the way as far as i can reach with a straight die grinder to remove any flash and casting marks
C&L inlet pipe with all the casting marks and flash removed
C&L meter
24lb injectors (coming soon)
Long tubes with all the welding ground smooth at the flange
B303 cam
1.72 roller rockers matched intake and exhaust
QA1 K member
stock control arms with modded bushings and double nuts
QA1 coil overs 14-175 springs
SN95 v6 electric fan
3G alt
battery in hatch
MSD 6AL2
ford racing wires (for now)
MSD cap and rotor
4.10 gears
spool
UPR radius arm uppers
UPR pro lowers
4cyl springs
focus fuel pump
lakewood 50/50's
no radio
no heat
no air ducts
no power steering
26" slicks on pro stars

thats about all of it

MikeH686 · Apr 20, 2013

Seems like you should dip into the 11's I'm still trying to figure out what I'm gonna run

srtthis · Apr 20, 2013

i hope so! for what ive spent money wise many people wouldnt think it could be done

RangerJoe · Apr 20, 2013

You need to hurry up and get back to the track!

Joe

MikeH686 · Apr 20, 2013

Hey y'all at mir this weekend

srtthis · Apr 20, 2013

No... Motors back apart again.

MikeH686 · Apr 20, 2013

Oh cuts I saw the door wars had 275 guys in it figured y'all would be down here I'm going tomorrow to watch eliminations and the car show to get some idears for my car

srtthis · Apr 20, 2013

We had planned to but we keep melting number 4 and we have zero clue why as of right now

MikeH686 · Apr 20, 2013

How longs it been doing that?

srtthis · Apr 21, 2013

Last 2 passes

CarMichael Angelo · Apr 21, 2013

srtthis said:
We had planned to but we keep melting number 4 and we have zero clue why as of right now

Let me be of assistance;

Obviously any person who has half a brain would know that melting #4 is a direct result of too much of one thing, and not enough of something else.

Jeez! do I have to tell you everything?

MikeH686 · Apr 21, 2013

I hear its cus Derek keeps leaving rags in cylinder 4

88LX5.Oh · Apr 21, 2013

Hey does the V6 SN fan cool pretty well? Because I have one of those laying around and may use it on my car if my current fan ever burns up.

srtthis · Apr 21, 2013

You'd think that but its got a lot more fuel and a lot less timing then every other hole...

madmike1157 said:
Let me be of assistance;

Obviously any person who has half a brain would know that melting #4 is a direct result of too much of one thing, and not enough of something else.

Jeez! do I have to tell you everything?

It seems to cool just fine. But it's been awhile since I had it out in the dead heat of summer

srtthis · Apr 24, 2013

just picked up an H pipe after lunch.... going to see if a BBK H pipe will line up with a set of mac long tubes

edit... and it doesnt

hoopty5.0 · Apr 25, 2013

Looks like a job for your handy dandy cordless DeWalt 24v sawzall. My favorite tool, hands down.

Also, when's this thing gonna race again? I've been axiously awaiting and the buildup is killing me!

srtthis · Apr 25, 2013

hoopty5.0 said:
Looks like a job for your handy dandy cordless DeWalt 24v sawzall. My favorite tool, hands down.

Also, when's this thing gonna race again? I've been axiously awaiting and the buildup is killing me!

24V... damn i aint seen 24V stuff in YEARS! and i work for them!

i got the shift forks and top cover to the trans with me right now im going to clean them up in the parts washer to get some crap out of the top case. pretty much once the trans is back in im heading to the track

MikeH686 · Apr 25, 2013

Hey the back of my t5 is leaking trans fluid would it be the tail shaft seal that I can see of the one that's inside the rear casing?

srtthis · Apr 25, 2013

the seal on the end of the trans is the only seal back there. the tailshaft to the main case is RTV and the top cover to the main case is RTV

MikeH686 · Apr 25, 2013

OK sweet I thought I read somewhere here there were two seals which didn't honestly make any sense but I'm gonna get this on order and throw my trans up in here this weekend maybe

11 sec GT40 build....

the guy doing it does every local racers rear end

Mine is only two inches though.

the guy doing it does every local racers rear end

I leave the horn on while driving

Mine is only two inches though.

the guy doing it does every local racers rear end

Mine is only two inches though.

the guy doing it does every local racers rear end

Mine is only two inches though.

the guy doing it does every local racers rear end

my rearend will smell so minty fresh,

Mine is only two inches though.

the guy doing it does every local racers rear end

the guy doing it does every local racers rear end

mechanicus terribilis

the guy doing it does every local racers rear end

Mine is only two inches though.

the guy doing it does every local racers rear end

Mine is only two inches though.

Similar threads

Privacy & Transparency

Privacy & Transparency