slow84lx
clean it good before insertion
Kyle, take a deep breath and relax a minute.
When you are ready, check that all connections are tight, bleed the master (it can be done on the car), and then do the complete bleeding process again.
Check to confirm that the booster vacuum is hooked up correctly.
If your problem is still there then take a hard look at the booster, new or not.
When you are ready, check that all connections are tight, bleed the master (it can be done on the car), and then do the complete bleeding process again.
Check to confirm that the booster vacuum is hooked up correctly.
If your problem is still there then take a hard look at the booster, new or not.