90 Lsc Rearend In A 89 Fox Lx

they fit with the 94-98 waffle wheels

back when i first got mine

to make it work with those cobra wheels more than likely youll need to flip the caliper brackets.. get stock length axles and all that. then youll need the foxbody brake hard lines and the V8 center brake hose and bracket. along with the brake likes from the firewall back to the bracket

thats what you'll need to do it right

Its been long time since I've seen a LSC rear....

You can flare and add line to go over to the left side under the car. You may have to cut the brake line bracket off the car and rivet it or weld it on the mustang. Since you have everything the swap should be a lot easier.

The 4.0 ranger axles won't fit ( I don't think )....however, sn95 axles may fit. Not 109%

My car has a cobra IRS and I found the best fitting wheels are from 09 and up 50mm backspacing.

The rear housing in the LSC should be the same length of as a fox. The axles are longer for disc brakes. You could ( technically ) put the 7.5 rear axles in the 8.8 housing.....swapping backing plates, drums, and such. Don't know why anyone would do that.

The mounting points for the rear control arms ate ( supposedly ) a little tiny bit different.

Let us know how everything works out.