Custom IC Install (Pics!)

[89Notch]

Well, I finally got all the parts I needed to make my custom intercool(minus the BOV) With memorial day weekend I finally had time to put it all in there. I think I took the hard way of doing it, I didn't remove my front clip or Radiator but somehow was able to jam the 3" wide IC in there with a little bit of help from my dad. The piping only took about 3 hours to mock up and cut to size. The inlet and outlet of the IC have a pretty tight clearance to the frame and it was difficult putting the hose clamps on but other than that everything was real easy to do. The car started easier and idled 10 times better than with the old tubing setup also. I forgot to resize the pictures so here are links instead... Now all I need is a smaller blower pulley anybody know who sells P1-SC pulleys?

Piping mocked up ready to be wiped down to remove aluminum shavings
A

Driver Side
B

Underneath
C

Pass Side
D


Final Picture
E

 

[sweet88gt]

I like the pics, looks good. What type of intercooler did you use (2 core,3 core,procharger or other)?? I have also seen those red rubber connectors before, but where did you get them from??

 

[89Notch]

It's a 30x12x3" bar & plate (including endtanks) ebay IC, the tubing also came from ebay and the connectors came with the tubing but they are just rubber so i'll probably change them out soon to something stronger.