Progress Thread Darkfader's 93 Gt Progress - Back to work

[Noobz347]

¡ƃuᴉllᴉʞ ɐ ǝʞɐɯ ɐ uɐuuƃ sᴉ pᴉʞ ˙suoᴉʇᴉʇǝdɯoɔ ƃuᴉpʅǝʍ ǝɹǝʍ ǝɹǝɥʍ pǝuɹɐǝʅ ᴉ pǝɥʍ plop sɹɐǝʎ ʎɐpoʇ sɐʍ ᴉ
!oʇ ǝʌɐɥ ʇou sǝop ǝɟᴉʍ sᴉɥ ʇnq ʞɹoʍ ʎʅʇuɐʇsuouɔ sʞɹoʍ ǝɥ ʼssǝlʅᴉɐʇs uᴉ suoɥʇǝʞ lɐᴉɔɹǝɯɯoɔ ɯoʇsnɔ sǝop ʇɐɥƃ ʎnƃ ɐ ʍouʞ ᴉ


What?

 

[darkfader]

I wish I could quit my job and just stay home and work on this thing for 80-100 hours a week until it was done. Not happening. I’ve got just about all the paint and body supplies I need and just got the windshield removed.

I’d love recommendations on the proper solvent to get the windshield adhesive off the car. Maybe just acetone and a plastic scraper? Heatgun?

I’m ready to clean, pull dents, sand and seal I guess.

 

[Noobz347]

What I can see of it looks to be in awesome shape.

 

[darkfader]

Thanks Noobz, it really is. There are a few door dings here and there but other than that and a spot in the engine bay that looks like the aftermath of a leaking battery, I think it’ll clean up really nice.

The plan for the immediate future is to get corrosion in the bay sanded off, some minor dent pulling/mudding as needed and prep/sanding for sealer/primer/base/clear.

Once the garage is dust free, I’ll begin engine assembly and transmission rebuild. Still shooting for roadworthy by July 2026.

 

[darkfader]

Well it’s happening. Finally a long vacation from work, so I can actually get something accomplished on this car of mine. It’s been blown apart for far too long. I’ve sanded, worked dents, applied fillers and glazes and rust encapsulator and epoxy primer. lol. Epoxy is not done. I thought a couple aerosol 2k cans would do it but not even close to covering all the bare metal. So I just ordered up a quart kit and will spray it for real. Tomorrow the wife and I will power clean, mask, and rearrange the garage so it’s suitable for spraying. Which means Monday night I should have the sheet metal under primer.
Exciting times ahead.

 

[General karthief]

That's a nifty set of saw horses

 

[darkfader]

That's a nifty set of saw horses

They’re Kobalt, available at Lowe’s. Super handy for dealing with sheet goods if you do more than occasionally.

Stilllllllll prepping for paint. Is it literally a million things to do before actual coatings get atomized? Or is figuratively?? lol whatever. Pressing on. Coatings will fly soon. Painting on a budget. Hopefully this works out for me.