DITCHING SMOG EQUIPMENT

5

5ohjoe87

Member

Mar 13, 2003

40

0

6

Pittsburgh,PA

Jun 28, 2004

#1

• Jun 28, 2004

• #1

The heads I purchased are not drilled for any smog equipment they are dart 195 aluminium heads. The heads are going to be bolted onto a 347 strocker which is not 50 state. Will ditching the smog crap ie smog o matic pump, egr, and the tubing interfere with computer controller? I run a cat less pro chamber already I know the egr is on the tb but what good is it without the smog pump? I am getting into what I consider the next level of performance.

 

88stangmangt

Active Member

Nov 25, 2003

2,332

1

48

Stafford,VA

Jun 28, 2004

#2

• Jun 28, 2004

• #2

none of it is worth anything pull it all off take that charcoal canaster off too while your at it.

 

3

347 Special

New Member

Nov 27, 2003

78

0

0

las vegas

Jun 28, 2004

#3

• Jun 28, 2004

• #3

I yanked all my smog also, it wouldn't pass w/it on so off it went. Zero comp. issues. Although i cant remove my char. canister. If i even unplug one of the two hoses i get ALOT of gas smell inside my car and it runs like, well lets just say a YUGO could keep up.

 

Z

Zombietime

New Member

May 9, 2004

86

0

0

Jun 28, 2004

#4

• Jun 28, 2004

• #4

I only have one hose hooked up to my charcoal canister. can someone post a pic of how it's supposed to look?

 

_jb_

New Member

Mar 4, 2004

808

0

0

Michigan, Berrien County

Jun 28, 2004

#5

• Jun 28, 2004

• #5

I just ditched the pump itself and saved it. I left all the pluming on the car though. I will probily live around Flordia or somewhere like that, and I'm sure they will move to testing cars soon.

 

S

Speeds8erM-1

Founding Member

Sep 6, 2000

1,240

0

36

Pensacola Florida

Jun 30, 2004

#6

• Jun 30, 2004

• #6

Have you weighed the smog pump?

 

jaidedeye

Member

Apr 4, 2004

627

0

16

Goldsboro nc

Jun 30, 2004

#7

• Jun 30, 2004

• #7

ya know alll states are going to emissions testing soon....my county in nc is testting with sniffer satrting jan 05.....id keep that stuff in storage until you need it..

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

33

129

Jun 30, 2004

#8

• Jun 30, 2004

• #8

if you remove the EGR, i think you can risk detonation if you dont let the puter know about it. when EGR gasses are introduced, they cool the chambers. also, since the mixture is diluted and burns slower, the puter advances the timing a decent bit. that can lead to detonation if you dont have the EGR gasses being recirculated (advanced timing with no dilution and slower burn).
this is just general info - i dont know with your mods if there are provisions around that scenario.

good luck.

 

jrichker

StangNet's favorite TOOL

In Remembrance. Thank you for your contributions

Mar 10, 2000

27,512

2,811

234

Dublin GA

Jun 30, 2004

#9

• Jun 30, 2004

• #9

Charcoal canister plumbing - one 3/8" tube from the bottom of the upper manifold to the rubber hose. Rubber hose connects to one side of the canister solenoid valve. Other side of the solenoid valve connects to one side of the canister. The other side of the canister connects to a rubber hose that connects to a line that goes all the way back to the gas tank. There is an electrical connector coming from the passenger side injector harness near #1 injector that plugs into the canister solenoid valve. It's purpose is to vent the gas tank. The solenoid valve opens at cruse to provide some extra fuel.

 

_jb_

New Member

Mar 4, 2004

808

0

0

Michigan, Berrien County

Jun 30, 2004

#10

• Jun 30, 2004

• #10

Speeds8erM-1 said:

Have you weighed the smog pump?

Click to expand...

Smog pump=8 lbs.