• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

DYNO TUNE TOMOROW!!! Guess my numbers and you get a cookie!!!

  • Thread starter Thread starter BlueOvalStangGT
  • Start date Start date Aug 25, 2004
  • 1
  • 2
  • 3
Next
1 of 3 Next Last

BlueOvalStangGT

Active Member
Oct 27, 2003
2,849
0
46
Tampa Florida....USF!!!
Aug 25, 2004
#1
  • Aug 25, 2004
  • #1
Hey I just got off the phone with Razors Edge and sceduled an appointment tomorow at 4. Im really siked, cant wait to see how much power im making. Anyways, anyone have any tips for me? I get out of school at 2:30 and will probably get there around 3:45 so not really too much time to cool down but thats the fastest I can get there. I was thinking of bringing a cooler with a couple bags of ice, yay or nay? Should I keep my timing at 10? Also what should I have my MSD 6btm at? Oh and im gonna make another post of this but even with my new supercharger belt, when I first start up my car it lets out this nasty squeak and screech (belt slipping I guess) but I cannot get my belt any tighter then it is. I have it so tight the idler pulley does not slip if oyu try to turn it by hand when the cars off. Any ideas?Hmm what else.... I guess thats it, heres whats in my car

Vortech V1 S-trim @ 11-12#'s of boost
AFM PowerPipe
75 mm Pro-m MAF
36# FRPP Injectors
255# GSS340 Walboro Fuel Pump
Kirban AFPR
3.73s
70 mm Pro products TB
Cobra Intake Manifold
Nitto 555r's
MAC Longtube Headers
UPR off road x-pipe
Flowmaster 3chamber catback
MSD 6btm
FMS 9mm wires

How much power should I be putting down? The guy is charging me $289 for a chip, and $150 an hour for a tune. Oh and he wanted to know what kind of computer we had in our cars, I forgot so I couldnt tell him. GUESS MY NUMBERS!!!
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Aug 25, 2004
#2
  • Aug 25, 2004
  • #2
385 sounds right if this guy knows how to tune. If your getting a chip, you dont use the btm. Keep the timing @ 10* and let the chip control it. I'd shoot for a mid 11:1 a/f.
 

94TURBO5 O

New Member
Mar 14, 2004
2,509
0
0
VA
Aug 25, 2004
#3
  • Aug 25, 2004
  • #3
385 rwhp
 

BlueOvalStangGT

Active Member
Oct 27, 2003
2,849
0
46
Tampa Florida....USF!!!
Aug 25, 2004
#4
  • Aug 25, 2004
  • #4
385?!?!?!haha sweet, good thing i was hoping for 350. only thing is, you cant both guess 385, im only sending out one cookie.... oh and should I sell my MSD 6btm then?
 

flying high

Founding Member
Apr 5, 2000
1,835
0
0
colton ca
Aug 25, 2004
#5
  • Aug 25, 2004
  • #5
375
 

Nucking Futs

Founding Member
Jan 5, 2002
158
0
16
Franklin TN
Aug 25, 2004
#6
  • Aug 25, 2004
  • #6
1 dollar Bob.
 

SN95StangMan

New Member
Jul 5, 2003
1,292
0
0
Lynwood, CA
Aug 25, 2004
#7
  • Aug 25, 2004
  • #7
Nucking Futs said:
1 dollar Bob.
Click to expand...

I say 378.9 HP. BTW, I prefer chocolate chip.
 

type911

Founding Member
May 15, 2002
169
0
0
Port Charlotte/ Boston
Aug 25, 2004
#8
  • Aug 25, 2004
  • #8
I dont think people know you will be on a Mustang Dyno. so I say 325. ON a dynojet I would say those guys are right on, but mustang dynos usualy are 12-15% lower numbers wise. So I say 325.
 

BlueOvalStangGT

Active Member
Oct 27, 2003
2,849
0
46
Tampa Florida....USF!!!
Aug 25, 2004
#9
  • Aug 25, 2004
  • #9
Should I find a different place with a dyno jet? 375 sounds alot meaner then 325
 

donjohn

New Member
Feb 7, 2004
1,757
0
0
Irvine - Southern California
Aug 25, 2004
#10
  • Aug 25, 2004
  • #10
ill split the board at 350
 
W

wytstang

Mustang Master
Mar 14, 2004
4,988
4
78
Summerville,SC missing South Fl. weather :(
Aug 25, 2004
#11
  • Aug 25, 2004
  • #11
345hp instead of a cookie can you send me a "Special" brownie
 

Sleepy McNastee

New Member
Feb 5, 2004
491
0
0
Lawrence, KS
Aug 25, 2004
#12
  • Aug 25, 2004
  • #12
Mustand dyno: 354
Dynojet: 377

I like cookies.

Edit: I changed mine cause I didn't see you were running 12 lbs...
 

type911

Founding Member
May 15, 2002
169
0
0
Port Charlotte/ Boston
Aug 25, 2004
#13
  • Aug 25, 2004
  • #13
Opinions very but I think most will tell you Mustangs are more accurate and consistant. If you want bragging rights then your looking for a Dynojet. If you want a good tune for your chip then Mustang. All you have to do is add 12% to your number if you want to tell people what you put down. or tell them you dynod on a mustang which is 12% less then a dynojet. (the Honest way) dont sweat the small stuff.
 

BlueOvalStangGT

Active Member
Oct 27, 2003
2,849
0
46
Tampa Florida....USF!!!
Aug 25, 2004
#14
  • Aug 25, 2004
  • #14
Just got off the phone with razorsedge again. He said dynojets are accelerometers, they use a 1800 pound drum, your car does not weigh 1800 pounds. That is why mustangdynos are more accurate because they use a brake to simulate real world conditions. He also said his is about 14% off a avg dynojet. Can anyone answer any of my any questions?
 

mystang94gt

New Member
Jun 14, 2004
951
0
0
Bay Area, CA
Aug 25, 2004
#15
  • Aug 25, 2004
  • #15
Here's one...Yes bring the ice for your intake!! It will only take a few minutes to cool down your intake just make sure to have a towel to wrap around it so you dont get water all over the place. Works great for me at the track to cool down my car after the long drive.
 

Rootus

Officially Addicted
Feb 8, 2003
6,659
1
0
Portland, Oregon
Aug 25, 2004
#16
  • Aug 25, 2004
  • #16
BlueOvalStangGT said:
JHe said dynojets are accelerometers, they use a 1800 pound drum, your car does not weigh 1800 pounds.
Click to expand...
Maybe it depends on the model of Dynojet, but the one I go to uses a 3000# drum.

Dave
 

DougNuts

Founding Member
Jul 11, 2000
2,596
0
47
Georgetown Ky
Aug 26, 2004
#17
  • Aug 26, 2004
  • #17
If I were getting a tune, I'd probably prefer a mustang dyno, although that decision is based off internet rambling about mustang dynos being more real world.

I guess 343 rwhp
368 rwtq (for an additional cookie)
 

95snoozer

Active Member
Dec 14, 2002
2,572
1
48
RCR
Aug 26, 2004
#18
  • Aug 26, 2004
  • #18
mustang dynoes apply a load based on your cars weight. it gets the real world number. if you are tuning part throttle and wot you WANT to do it on a mustang dyno.

none of the dyno jets here have a 3k drum. they are closer to 2k thast why they read higher.

if you want a number for dyno queen purposes, have them take the load off and set it to the load of a dyno jet. then get your numbers. if you are in a tuning sesion i am sure they wont mind doing a final pass like this.
 

94TURBO5 O

New Member
Mar 14, 2004
2,509
0
0
VA
Aug 26, 2004
#19
  • Aug 26, 2004
  • #19
So what time will the #'s be presented on the boards?
 

Stump1000

New Member
Apr 5, 2003
495
0
0
Morristown Tn
Aug 26, 2004
#20
  • Aug 26, 2004
  • #20
i say 330hp. Sorry for low ballin ya.. haha
 
  • 1
  • 2
  • 3
Next
1 of 3 Next Last
You must log in or register to reply here.

Similar threads

D
96 get convertible-sell or part out?
  • DTCstang
  • May 17, 2026
  • What is it Worth?!?!?
Replies
5
Views
158
What is it Worth?!?!? May 18, 2026
nickyb
Progress Thread Progress Thread- From6to8's 1994 Cobra Supercharger install
  • from6to8
  • Sep 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 20 21 22
Replies
420
Views
10K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
A
Fox Planning on building my foxbody and was wondering if I can get any tips or anything to watch out for!
  • Angelq1028
  • Oct 31, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3 4
Replies
76
Views
5K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 29, 2025
Robman8028
R
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
529
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?