heads & cam IN

M

martfr2

New Member

Oct 30, 2006

10

0

0

Apr 17, 2008

#1

• Apr 17, 2008

• #1

Guys,


I just finished installing my new heads & cam in my 88 LX. I went with AFR165 & E303 since I got it for free. I am also running TrickFlow intake, JBA shorties, & flowmaster exhaust. My question to you guys was if I am going to bigger injectors & a MAF? I have the stock 19lbs right now please let me know if any of you have experience problem with these injectors with this mild combo. I plan to tune the car and would like to have everything in-place before I do that!

Thanks for your time

 

90_Red_LX

Member

Sep 29, 2003

668

5

19

Asheboro, NC

Apr 17, 2008

#2

• Apr 17, 2008

• #2

You could run and drive the car with those injectors, but that setup needs a 24lb injector.

 

BlownFiveLiter

have car, will race....wait, it doesn't run

15 Year Member

Nov 29, 1999

3,133

18

108

Chicagoland

Apr 18, 2008

#3

• Apr 18, 2008

• #3

Agreed. I'm running TFS heads, Typhoon intake and the TFS1 cam on 19lb injectors and I'm very leary of winding it out at all, for fear of going too lean. Go with some 24's or 30's.

 

mustangfan1990

New Member

Jul 17, 2005

505

1

0

Lenoir, North Carolina

Apr 18, 2008

#4

• Apr 18, 2008

• #4

I ran 24s with my combo but I had AFR 185s and stage 2 cam with no tune and it ran great

 

B

btlfed91

New Member

Apr 18, 2008

42

0

0

STL

Apr 18, 2008

#5

• Apr 18, 2008

• #5

If I remember correctly typically 19lb injectors are at their limit at about 300 hp so if you have everything tuned right you will probably be pushing it. I have TFS heads and a stage 1 cam and I went ahead and went with 24s just to be on the safe side

 

vikingpower

New Member

Dec 6, 2004

656

0

0

CWU Ellensburg, WA

Apr 18, 2008

#6

• Apr 18, 2008

• #6

mine ran fine with 30's (except for idle surge) before I started my engine swap.