Do the hooker headers from LMP come with a matching X-Pipe???? http://www.lmperformance.com/3566/50.html Also I like them cause they clear the trasmition so you can work on the clutch and stuff... Aslo how are the power gains with these because the bends are different than the overage longtubes????
Hooker LT`s????
- Thread starter 03MGT
- Start date
1bad04GT
New Member
i have heard that of all the brands of headers, hookers are the hardest to put on a 4.6. 
call around and chk tho...
call around and chk tho...
Honestly, not many members have used them. I don't know why. Once installed you can drop the tranny w/o taking them off. Maybe the price? I know Kooks makes headers that does the same thing. The few I have heard of that installed these 2 brands did not have problems but I cannot answer your question about the x-pipe.
twogts4us
15 Year Member
StangPro
New Member
Choosing headers based on trans access is like saying you don't want a supercharger as it makes it harder to get to the fuel rails. It's just assinine.
How often do you change your clutch or pull the trans? If it's more than once every 50,000 miles and you don't race, you need to take your mod money and take driving lessons.
Trans access with other headers works out to about an hour.
http://www.stangpro.com/html/articles/hooker.htm
That's our install of the Hooker's and after using most brands out there, I'd recommend almost anything else except MAC before Hooker. Not that they are bad, there's just a few better ones and no reason to do things like run the steering shaft through the center of the primary tubes like Hooker does. Poor design is more important than that one hour every few years.
How often do you change your clutch or pull the trans? If it's more than once every 50,000 miles and you don't race, you need to take your mod money and take driving lessons.
Trans access with other headers works out to about an hour.
http://www.stangpro.com/html/articles/hooker.htm
That's our install of the Hooker's and after using most brands out there, I'd recommend almost anything else except MAC before Hooker. Not that they are bad, there's just a few better ones and no reason to do things like run the steering shaft through the center of the primary tubes like Hooker does. Poor design is more important than that one hour every few years.
