How High Can I Rev My Setup

[302mustanglx]

Ok fellas i wondering how high i can rev my setup.

My setup consists of

procomp dual plane intake (1500-6500)
holley 600 carb
e303 cam
longtubes (fullexhaust)
alumenum pullies
373 gears
alumenu d-shaft
gt40p heads (afr springs)
1.7 rockers
msd 6al2
msd wires
and about 30 Degres of timing

 

[Noobz347]

On an N/A car... 5800-6000 rpm before the cam stops making power.

 

[302mustanglx]

what about a mild car like mine with the setup i have do u think 6000k is oky

 

[Noobz347]

I think it's fine so long as you don't bounce off the rev limiter.

Deisregard that statement... you don't have a rev limiter. LOL

 

[whitey68]

stick it to the wood, watch the tac, make a note of when it kicks out a rod......... you want to be just under that rpm. lol

 

[tobalx]

i have a simalar set up,gt40 e303 1.72 rr's and mine hits the "wall'' at 6100. no point going past it. i shift at about 5900

 

[Noobz347]

Moved to tech

 

[Mustang5L5]

Stock lower end? I wouldn't take it much past where the stock rev limiter would kick in


Sent from my iPhone 4S using Tapatalk

 

[2000xp8]

With an e cam, you are going to run out of the power long before you damage the engine.
Operating range of an E is only up to 5500rpm.

 

[srtthis]

I think it's fine so long as you don't bounce off the rev limiter.

Deisregard that statement... you don't have a rev limiter. LOL

yea he does... the 6AL2 has an adjustable one in it

 

[Rick 91GT]

With an e cam, you are going to run out of the power long before you damage the engine.
Operating range of an E is only up to 5500rpm.

Yeah Im with 2000xp, that car will be out of breath by 5400rpm....