"Rated" was the wrong terminology. 575 HP is the advertised HP that the crate produces as is. I bought it from Ford Racing. A follow up question that I have is what would a reputable brand be for an EEC?N/A 351W with a hydraulic cam could probably run on 36 lb injectors.Maybe even 24.
With the right driver and EEC, it doesn't really matter though. You can tune fine with those. You'll just have more room to grow. Boost is next.
I dunno what "rated for" means. My block and rotating assembly are "rated for" 1100 HP. It'll never see that though. "
I will refer you to the expert in such things: @a91what can better tell you how to do it efficiently so you don't have to spend money twice."Rated" was the wrong terminology. 575 HP is the advertised HP that the crate produces as is. I bought it from Ford Racing. A follow up question that I have is what would a reputable brand be for an EEC?
They are Deka'sIf they're the Deka injectors you should be fine.
I don't know too much about ECU's or what would be a good price for a reliable ECU. I would say $500 max.I often run 80lb injectors in 302 based engines. Much larger 210 injectors on e85 cars and even turbo 4cyl..
I personally run Ford Racing LU80 on my twin turbo 393w. You will be fine.
As for the ecu it's really up to you options out there are huge. I have helped guys make 1000+ with a $350 micro squirt. What kind of budget do you have?
With the microsquirt will this work with the stock wire harness? What needs to change in order to use the microsquirt?500 is about as cheap as your going to find
I went with the microsquirt. I have 80lb Deka's.Get a Holley terminator kit don’t go cheap they are the easiest to tune and get max power. If they are deka injectors you’ll be fine and not need to replace them until your over 550hp
Easiest to tune is very subjective. What I think is easy you may find difficult ect.Get a Holley terminator kit don’t go cheap they are the easiest to tune and get max power. If they are deka injectors you’ll be fine and not need to replace them until your over 550hp
The Holley is the most adjustable system you can get and not to mention can be done remotely. You pay for $5-600 for a quarter horse or squirter and you still have all your 30 year old ecm and wires running through out the engine bay. For $1000 you get a plug and play system that will never need to be replaced again.Easiest to tune is very subjective. What I think is easy you may find difficult ect.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?