KZGUNS tuning

KZGUNS · Jan 26, 2019

a91what said:
Lol yeah I'm looking for that and what idle is at 30% 40% 50% ect...

Ok got it! When I go back out I’ll run it again and get those numbers for you!

KZGUNS · Jan 26, 2019

@a91what
Rpm at the following duty steps
16.5% 875-900 afr 14.10
20% 1000
30% 1040
40% 1410
50% 2090
60% 2550
70% 2790

Also I dropped it till it stumbled and surged and that happened at 14.1

a91what · Jan 26, 2019

Copy that, I will show you how to use that info once I'm back at my PC. BBQ time tonight!

KZGUNS · Jan 26, 2019

No rush! Enjoy your bbq. It’s 12° here. So they’ll be none of that. Lol

KZGUNS · Jan 26, 2019

Before I forget. I had to lean into the pedal to get it to start (more so once warmed up). If I bump up the cranking duty steps will that let more air in via the iac to remedy this.

a91what · Jan 27, 2019

Yes it will

a91what · Jan 27, 2019

Ok so i am going to load your tune file and do a video on how to setup CL idle, the only thing i am missing is the Datalogs during your testing of the timing vs kpa and rpm vs duty%
I can make the video without them but i would like to include that information in video format for my tuning channel..

KZGUNS · Jan 27, 2019

a91what said:
Ok so i am going to load your tune file and do a video on how to setup CL idle, the only thing i am missing is the Datalogs during your testing of the timing vs kpa and rpm vs duty%
I can make the video without them but i would like to include that information in video format for my tuning channel..

Of course I forgot to dl those sessions. I suppose I could do it over?

a91what · Jan 27, 2019

If you could sir, I can always make them a separate video.

KZGUNS · Jan 27, 2019

a91what said:
If you could sir, I can always make them a separate video.

I’ll do it today for you.
You want dl sweeping the timing and the duty steps correct

a91what · Jan 27, 2019

Yes that is correct, this way i can make a 2 part video series on how to use the information from the datalogs to setup the idle

stanglx2002 · Jan 27, 2019

Yay!!!! A new video

a91what · Jan 27, 2019

View: https://youtu.be/efIvMI9qrZ0

and a copy of the tune file

KZGUNS · Jan 27, 2019

here are the DL
hopefully this has all the info you needed.

KZGUNS · Jan 27, 2019

excellent video!
I'll get the tune loaded in a bit and get another log

Thanks,
Ken

KZGUNS · Jan 27, 2019

here is the DL from new tune. I did have to lean on the pedal to get it to start. DL starts soon after it starts. I reved it a couple times so you can see how it recovers. Dips a bit low but didn't stall

-Ken

a91what · Jan 27, 2019

It may have alot to do with the AFR, I noticed your ve table looks rough. I'm out and about right now I'll take a look later.

KZGUNS · Jan 27, 2019

Ya I haven’t done much with the VE table outside of idle. It did idle well though with the new tune.

a91what · Jan 27, 2019

I assume the blocks with 14 in them are where it idles correct? That's a very low number, I like to keep the idle ve above 30 or so. We can change some things to bring that idle ve up. I am thinking your injector dead-time is wrong, this will affect the ve table heavily at low load/rpm.

I know we went through this before but what injectors do you have?

KZGUNS · Jan 27, 2019

Correct 14 is where it idles. I’m not sure who makes these injectors but they are 24# and I attached the data I have for them. They look like ford 24# but I think they’re aftermarket.

KZGUNS tuning

I can swing up to 11”

I can swing up to 11”

SendMeUrDataLog

I can swing up to 11”

I can swing up to 11”

SendMeUrDataLog

SendMeUrDataLog

I can swing up to 11”

SendMeUrDataLog

I can swing up to 11”

SendMeUrDataLog

CT Material here

SendMeUrDataLog

Attachments

I can swing up to 11”

Attachments

I can swing up to 11”

I can swing up to 11”

Attachments

SendMeUrDataLog

I can swing up to 11”

SendMeUrDataLog

I can swing up to 11”

Attachments

Similar threads

Privacy & Transparency

Privacy & Transparency