Mach 1 Whipple Swap

Mustang92

SN's #1 1%er

Jun 6, 2001

6,467

2

79

South Florida

Sep 27, 2009

#1

• Sep 27, 2009

• #1

The car was already converted to a Eaton set up by me a few months back but I started having oil pressure issues shortly after finishing and started on the next step of my project. I had a shortblock built so I could run more boost and in the process I'm changing a few things on the car.

Here is a pic after I completed my Eaton swap. I made 411RWHP with 15* of timing and 8.5lbs of boost with this set up.


While the shortblock was being assembled I went ahead and stepped up and bought a Whipple 3.4.


The D&D Viper Spec 6 speed that will be replacing the 3650 that came in the car.


The new shortblock ready for me to start the longblock assembly.


Bill

 

Mustang92

SN's #1 1%er

Jun 6, 2001

6,467

2

79

South Florida

Sep 27, 2009

#2

• Sep 27, 2009

• #2

I picked these up from Modular Head Shop. My stock 04 heads ported with Livernois valve springs, new guides and valve seals.








I'll be starting the longblock assembly this week as well as buttoning up the front suspension changes I made while the car was down.

Bill

 

98COBRA281

10 Year Member

Nov 24, 2007

1,348

30

59

Port St. Lucie, Florida

Sep 27, 2009

#3

• Sep 27, 2009

• #3

sweet, ive been following it on modular rev...........

 

EPIK

Member

Jul 3, 2004

796

1

16

LEFT COAST

Sep 27, 2009

#4

• Sep 27, 2009

• #4

Very very nice!!! Man that thing is gonna be a beast!!!

 

Winters98GT

Whoop...whoop-whoop-whoop-whoop...GANGNAM STYLE!!!

Founding Member

Nov 29, 1999

5,520

1,291

224

H Town

Sep 28, 2009

#5

• Sep 28, 2009

• #5

Bill, what size/brand tire are you going to run on the car? Have you made any changes on the suspension? It's good to see you back around.

Mark

 

Mustang92

SN's #1 1%er

Jun 6, 2001

6,467

2

79

South Florida

Sep 28, 2009

#6

• Sep 28, 2009

• #6

Winters98GT said:

Bill, what size/brand tire are you going to run on the car? Have you made any changes on the suspension? It's good to see you back around.

Mark

Click to expand...

I have two sets of wheels. The 18's have MT DRs 305/35/18's on the rear and my 15's will have MT DR 275/60/15s on them. Although eventually I may give Nittos a try again on the 18" wheels as they worked pretty decent with the Eaton set up.

Rear suspension is pretty much the same as it was, front suspension is entirely different. I had stock K-member, Tokico adjustables and Eibach pro kit and went to UPR K-member, QA1 adjustables and coil overs.

Bill

 

68stang351

Founding Member

May 16, 2002

850

9

39

Savoy TX

Sep 28, 2009

#7

• Sep 28, 2009

• #7

That thing should fly!

There is a guy here locally that has a stock Eaton on his Mach. It's a stock Eaton, with a stock pulley, on his untouched Mach 1 motor, his only non-OEM Ford parts are longtubes, catback, and a CAI.

Runs 11.90's with a bunch of factory parts.

 

Mustang92

SN's #1 1%er

Jun 6, 2001

6,467

2

79

South Florida

Sep 28, 2009

#8

• Sep 28, 2009

• #8

68stang351 said:

That thing should fly!

There is a guy here locally that has a stock Eaton on his Mach. It's a stock Eaton, with a stock pulley, on his untouched Mach 1 motor, his only non-OEM Ford parts are longtubes, catback, and a CAI.

Runs 11.90's with a bunch of factory parts.

Click to expand...

Yep they run good with just the stock set up. I only got to make about 6 passes in mine before I ran into oil pressure issues and went 12.32 in 90* with minimal timing.

 

SaleenGT2001

Well-Known Member

Jul 18, 2005

2,811

4

58

Four Oaks NC

Sep 28, 2009

#9

• Sep 28, 2009

• #9

wow, thats gonna be a nasty car!!!!

i like how the shaker still stays on the car with the blower!!!

 

Mustang92

SN's #1 1%er

Jun 6, 2001

6,467

2

79

South Florida

Sep 29, 2009

#10

• Sep 29, 2009

• #10

SaleenGT2001 said:

wow, thats gonna be a nasty car!!!!

i like how the shaker still stays on the car with the blower!!!

Click to expand...

Thanks. The trick will be keeping it on there with the Whipple.

 

Mustang92

SN's #1 1%er

Jun 6, 2001

6,467

2

79

South Florida

Oct 18, 2009

#11

• Oct 18, 2009

• #11

Finally got some time to work on it and got the heads installed.



Timing chains on and cam timing done.



Timing cover and valve covers back on.



I have maybe another hour worth of work and it's ready to drop back in the car.

Bill

 

twogts4us

15 Year Member

Apr 1, 2004

4,188

12

79

Dunedin, FL

Oct 18, 2009

#12

• Oct 18, 2009

• #12

Hey Bill, are you selling your Eaton setup? And will it be a complete kit?

 

Mustang92

SN's #1 1%er

Jun 6, 2001

6,467

2

79

South Florida

Oct 18, 2009

#13

• Oct 18, 2009

• #13

twogts4us said:

Hey Bill, are you selling your Eaton setup? And will it be a complete kit?

Click to expand...

Everything except for the Eaton is needed to use the whipple so I don't have anything for sale. That's why I did the eaton swap first as you need all of it to install a whipple on a Mach 1.

 

C

CatmanJJ

Captain Tangnet

20+ Year Stangneter

Feb 5, 2002

4,379

1

68

Maryland

Oct 19, 2009

#14

• Oct 19, 2009

• #14

Unless I missed it, are you still running stock cams or have you stepped up to a custom grind?

 

B

bakos24

I find there is nothing better than a tasty wiener

Nov 29, 1999

4,461

87

134

NE, OH

Oct 19, 2009

#15

• Oct 19, 2009

• #15

Man, that is going to be awesome when it is done. Can't wait to see it.

 

Mustang92

SN's #1 1%er

Jun 6, 2001

6,467

2

79

South Florida

Oct 19, 2009

#16

• Oct 19, 2009

• #16

CatmanJJ said:

Unless I missed it, are you still running stock cams or have you stepped up to a custom grind?

Click to expand...

Stock cams, Livernois springs to handle the higher boost. After lots of research I found that aftermarket cams just aren't worth it. Very few really pick up any real power, a fair amount of them have issues down the road and the cost vs. power ratio sucks. 03/04 Cobras will make 600RWHP with just the 3.4 and that's what I'm looking for and shouldn't be a problem.

Bill

 

C

CatmanJJ

Captain Tangnet

20+ Year Stangneter

Feb 5, 2002

4,379

1

68

Maryland

Oct 20, 2009

#17

• Oct 20, 2009

• #17

Good ****, she's gonig to be a beast either way.

 

Mustang92

SN's #1 1%er

Jun 6, 2001

6,467

2

79

South Florida

Oct 22, 2009

#18

• Oct 22, 2009

• #18

I got the engine in tonight.





Probably won't have much in the way of updates till I get the driver side header, T-56 installed and exhaust back on the car.

Bill

 

sneaky98gt

10 Year Member

Apr 23, 2008

2,387

144

114

NC State University

Oct 22, 2009

#19

• Oct 22, 2009

• #19

Can you post up a link to your thread when you put the Eaton on? I'm kinda curious and wouldn't mind to read up on what all is involved.

-Will

 

Mustang92

SN's #1 1%er

Jun 6, 2001

6,467

2

79

South Florida

Oct 22, 2009

#20

• Oct 22, 2009

• #20

This was just the high level post about it.

http://www.stangnet.com/mustang-forums/786271-mach-1-eaton-swap.html

I have more detail on my site. Keep in mind it's for 4v's. I think there was suppose to be a company out there making a lower intake to use the eaton on a 2v.

Bill