• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

magnaflow or bassani catted x pipe

  • Thread starter Thread starter BNAZ
  • Start date Start date Aug 25, 2005
B

BNAZ

Member
Nov 29, 2004
52
0
6
MA
Aug 25, 2005
#1
  • Aug 25, 2005
  • #1
Can someone help me decide. For my yr the bassani aluminized x-pipe is 3 piece. Cost is 360. The Magnaflow is one piece. The mag in ss is about 500.
I have a mag cat-back and wasnt really happy with fit.
I dont want a raspy sound and think it best to go with the cats instead of o/r. I think their both equal in HP gain vs stock catted h-pipe. Ground clearance and fit are concerns also. Fox body is lowered about 1-1/4".
I'd like to order one today.
Thanks everyone
 

Kumm3

Founding Member
Jul 30, 2002
527
33
69
East Hartford, CT
Aug 25, 2005
#2
  • Aug 25, 2005
  • #2
why dont you get the SS Bassani???
 

tunedin302

I AM the law!!!
Jul 29, 2004
1,251
2
36
Pennsylvania
Aug 25, 2005
#3
  • Aug 25, 2005
  • #3
Get the stainless bassani ..... amazing piece. The magnaflow is a one piece stainless piece of crap. The hangers were in the wrong place, had to cut them and re-weld them in the correct place. It also pulled my entire exhaust system forward so the tips looked like a drunk person put them on. I have had both and wasted $500 on a magnaflow. JMO ... However, I couldn't be happier with the bassani.
 

Fishhawk

New Member
Jun 10, 2004
281
0
0
Michigan City, Indiana
Aug 25, 2005
#4
  • Aug 25, 2005
  • #4
I have Magnaflow X-W/Cats and they fit fine and sound good. Later I installed Bassani OR/X and the fit was a pain in the a$$. However, the Magnaflow did hang a little low. As far as ground clearance goes, I'd go with the Bassani.
 
B

BNAZ

Member
Nov 29, 2004
52
0
6
MA
Aug 25, 2005
#5
  • Aug 25, 2005
  • #5
I'm afraid of the fit with magnaflow and concerned about sound with Bassani
from what I've been reading.

Fishhawk: what was difference in sound since you went from magnaflow x
to Bassani x

Tunedin302: does the bassani sound deep or raspy

Kumm3: the price, 360 vs about 500. do you think they will still sound the same? I know I'll get 3 yrs out of aluminized steel
 

tunedin302

I AM the law!!!
Jul 29, 2004
1,251
2
36
Pennsylvania
Aug 25, 2005
#6
  • Aug 25, 2005
  • #6
BNAZ said:
I'm afraid of the fit with magnaflow and concerned about sound with Bassani
from what I've been reading.

Fishhawk: what was difference in sound since you went from magnaflow x
to Bassani x

Tunedin302: does the bassani sound deep or raspy
Click to expand...

Like I said, I have had both and you will notice little difference in sound. However, I actually think my bassani sounds better. The raspy sound comes from a thin wall tubing that a lot of companies use (especially BBK). Both bassani and magnaflow use a pretty good thickness tubing on their STAINLESS versions. Also, I had to pry the Magnaflow to fit on my headers. This is a known common problem that has been discussed on here many times. As a result, I found myself replacing an exhaust manifold gasket because of the force it put on my headers. Lastly, whatever you buy make sure it is stainless!! seriously! Do it right and you'll only have to buy it once!
 

Fishhawk

New Member
Jun 10, 2004
281
0
0
Michigan City, Indiana
Aug 25, 2005
#7
  • Aug 25, 2005
  • #7
BNAZ said:
I'm afraid of the fit with magnaflow and concerned about sound with Bassani
from what I've been reading.

Fishhawk: what was difference in sound since you went from magnaflow x
to Bassani x

Tunedin302: does the bassani sound deep or raspy

Kumm3: the price, 360 vs about 500. do you think they will still sound the same? I know I'll get 3 yrs out of aluminized steel
Click to expand...

Its hard for me to compare because the Magnaflows have cats and the Bassani are off-road W/O cats. Because of that the Bassani are a lot louder. I suspect Magnaflow off-roads would be also. Before I bought either X-pipe I did a little research and found that Magnaflow and Bassani have the best fitment results. Heard nothing but bad things about Mac and BBK.
 

Fishhawk

New Member
Jun 10, 2004
281
0
0
Michigan City, Indiana
Aug 25, 2005
#8
  • Aug 25, 2005
  • #8
tunedin302 said:
Like I said, I have had both and you will notice little difference in sound. However, I actually think my bassani sounds better. The raspy sound comes from a thin wall tubing that a lot of companies use (especially BBK). Both bassani and magnaflow use a pretty good thickness tubing on their STAINLESS versions. Also, I had to pry the Magnaflow to fit on my headers. This is a known common problem that has been discussed on here many times. As a result, I found myself replacing an exhaust manifold gasket because of the force it put on my headers. Lastly, whatever you buy make sure it is stainless!! seriously! Do it right and you'll only have to buy it once!
Click to expand...
It funny you should mention having to pry the Magnaflows. When I switched from Magnaflow to Bassani I had to do the same thing to make the Bassani fit. The Bassani pushed my cat-back and tail pipe's back about an two inch's.
 

QDRHRSE

New Member
Dec 31, 2002
1,590
0
0
Palmdale, CA
Aug 25, 2005
#9
  • Aug 25, 2005
  • #9
I had a full Bassani exhaust on my old 95 Cobra and it was absolutely the best that I've seen as far as fit, finish...etc. I myself do not typically buy Bassani stuff because of the price. I seldom keep cars long enough to really see a benefit. If you have the money and its a long term purchase- Bassani is the best as far as I'm concerned.
 

Black Sun 5.0

Founding Member
Mar 23, 2002
1,337
0
36
L.I., N.Y.
Aug 25, 2005
#10
  • Aug 25, 2005
  • #10
I had nothing but trouble with my Magnaflow x-pipe. Fitment issues and the cats almost set the car on fire every time I idled, they would get so hot. Customer service wasn't interested, either. Claimed to never have heard of such a problem.
 
B

BNAZ

Member
Nov 29, 2004
52
0
6
MA
Aug 25, 2005
#11
  • Aug 25, 2005
  • #11
I think I will go with the aluminized bassani w/cats, uless I can find the stainless for less than maybe 475. I dont drive in snow. I've heard pretty good things about the mustangtuning catted x pipe. I think its an upgraded SLP pipe Any comments.

Fishhawk: you got the older 85 lookin good. good job. nice lookin car
 

Kumm3

Founding Member
Jul 30, 2002
527
33
69
East Hartford, CT
Aug 25, 2005
#12
  • Aug 25, 2005
  • #12
BNAZ said:
I'm afraid of the fit with magnaflow and concerned about sound with Bassani
from what I've been reading.

Fishhawk: what was difference in sound since you went from magnaflow x
to Bassani x

Tunedin302: does the bassani sound deep or raspy

Kumm3: the price, 360 vs about 500. do you think they will still sound the same? I know I'll get 3 yrs out of aluminized steel
Click to expand...

well, if you are willing to spend 500 for the magnaflow, why would you only spend 360 for the BX line of bassani?

Go with the Full Stainless whenever you can, less headaches in the long run. And i vote you go with bassani, the fit and finish is like no one else, ive seen magnaflow, and believe me, they are better than most, but I still think Bassani is a higher quality than Magnaflow.

either way, i think youll be happy.
 

tunedin302

I AM the law!!!
Jul 29, 2004
1,251
2
36
Pennsylvania
Aug 25, 2005
#13
  • Aug 25, 2005
  • #13
Kumm3 said:
Go with the Full Stainless whenever you can, less headaches in the long run. And i vote you go with bassani, the fit and finish is like no one else, ive seen magnaflow, and believe me, they are better than most, but I still think Bassani is a higher quality than Magnaflow.
Click to expand...


GET STAINLESS!!!
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,356
208
114
Ohio
Aug 25, 2005
#14
  • Aug 25, 2005
  • #14
I have a Stainless Bassani Cat X Pipe, but mine is one piece. Sound is very good with FMS Headers and 2 Chamber Flowmasters Cat Back.
 

RacEoHolic330

I like to dress like a pretty girl
15 Year Member
Mar 4, 2003
4,014
1,698
203
Allentown, PA
Aug 25, 2005
#15
  • Aug 25, 2005
  • #15
Shakerhood said:
I have a Stainless Bassani Cat X Pipe, but mine is one piece. Sound is very good with FMS Headers and 2 Chamber Flowmasters Cat Back.
Click to expand...

Agreed, I have the same, but just with Bassani 1 3/4 shorty headers and the sound it just so amazing. Btw... my flows have surface rust on them while my bassani parts look nearly as good as the day they were new. Can;t go wrong with bassani fit and finish.
 

Kumm3

Founding Member
Jul 30, 2002
527
33
69
East Hartford, CT
Aug 25, 2005
#16
  • Aug 25, 2005
  • #16
RacEoHolic330 said:
Agreed, I have the same, but just with Bassani 1 3/4 shorty headers and the sound it just so amazing. Btw... my flows have surface rust on them while my bassani parts look nearly as good as the day they were new. Can;t go wrong with bassani fit and finish.
Click to expand...

i have the same setup, except i have the Bassani cat-back too.

the pipes have turned the purple color, but thats it, still looking good as new.
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,356
208
114
Ohio
Aug 26, 2005
#17
  • Aug 26, 2005
  • #17
Kumm3 said:
i have the same setup, except i have the Bassani cat-back too.

the pipes have turned the purple color, but thats it, still looking good as new.
Click to expand...

My Bassani X Pipe has a Purple/Gold color to it also and my Flowmasters have surface rust all over them!
 

tunedin302

I AM the law!!!
Jul 29, 2004
1,251
2
36
Pennsylvania
Aug 26, 2005
#18
  • Aug 26, 2005
  • #18
Shakerhood said:
My Bassani X Pipe has a Purple/Gold color to it also and my Flowmasters have surface rust all over them!
Click to expand...

Same here Flowmaster now offers a stainless muffler that I am considering. Oddly enough, it comes sprayed black.
 
You must log in or register to reply here.

Similar threads

Fox BBK X-pipe replacement Cat?
  • TIGGER
  • Aug 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
305
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 26, 2025
AeroCoupe
Which one of these 3 intakes make the most sense for my 331 combo
  • from6to8
  • Jul 25, 2024
  • 1994 - 1995 Specific Tech
Replies
7
Views
2K
1994 - 1995 Specific Tech Jul 26, 2024
AeroCoupe
P
Thoughts on this odd (smog legal) combo?
  • PJV9126
  • Feb 8, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 16, 2023
91AOD5.0LX
Took some pics, i do really own a mustang...
  • 2000xp8
  • Jun 20, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 6 7 8
Replies
148
Views
19K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 1, 2024
Mustang5L5
Cats, I need some feedback / reccomendations
  • WhiteCobra95
  • Feb 14, 2021
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
56
Views
6K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 26, 2022
manicmechanic007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?