MM Rollcage quality

gcwh02 · Mar 29, 2007

I'm looking to buy the MM roll cage for my vert. I know they make good products.. any word on the cage? Im doin 6 pt and bolt it in myself, then I'll just take it somewhere and have them weld where it should be.

gcwh02 · Mar 30, 2007

anyone?

Busted07 · Mar 30, 2007

Ok, im telling you this from first hand experience. I got the 6 point MM bar with swingout door bars. The back 2 bars are about 3/4" to 1" TOO SHORT of reaching the wheelwells in the back. Mine is in an LX Hatch though, not a vert.

When i was researching this, i never heard any complaints, but i ran into this dude on here (thehueypilot) and he had the EXACT same problem i did. They didnt cut the back bars long enough on his either.

I called MM to ask them about it, and they said that they have never heard of that. They said every cage is made in a batch and they are made all the same. I sent him pictures and ill show you exactly what i mean...

notice how its too short to weld it right to the wheelwell. Im going to have to cut it and lengthen it to make it work.

Take my advice, if you order it from them, test fit it immediately. If it doesnt seem to line up right, call them right away.

gcwh02 · Mar 30, 2007

damn that sucks, thats for the heads up. Any one else have experience in these cages?

Busted07 · Mar 30, 2007

By the way, every other part ive ever ordered from them was of great quality.

SRT · Mar 30, 2007

I have a 6 point autopower cage in my 88 vert, bolted right in nice and easy!

carbed87 · Mar 31, 2007

how do you guys with cages fit them in with all the interior pieces. i always see these niceley fitted cages, but wonder what they had to do to obtain that

gcwh02 · Mar 31, 2007

SRT said:
I have a 6 point autopower cage in my 88 vert, bolted right in nice and easy!

yea except they are 200 bucks more than the MM.

jikelly · May 15, 2007

How's the cage look?

Busted07 · May 15, 2007

carbed87 said:
how do you guys with cages fit them in with all the interior pieces. i always see these niceley fitted cages, but wonder what they had to do to obtain that

In a hatch, you have to take the speaker grills out, fit the plastic pieces over the rollbar before you weld it, or cut it so you can move it after the cage is welded... but the way i did it, i had them slide the 1/4 window plastic over the back bars before it was welded. now all i have to do is trim a hole in the speaker grille and fit it around the bar. If i had it all to do over again, i would have went with a cage like the ones from wolfe racecraft that extend to the spare tire wheelwell, or down through the floor to the rear part of the frame... but live and learn i guess.

ozanracing · May 15, 2007

I setup and welded-in a MM 4pt. cage in my vert. I liked the quality and price, plus everything fit nice. Also, the subframe connectors from them are good quality. MM=

Busted07 · May 15, 2007

ozanracing said:
I setup and welded-in a MM 4pt. cage in my vert. I liked the quality and price, plus everything fit nice. Also, the subframe connectors from them are good quality. MM=

Yep, i got the MM XL Full length subframes, and have 0 complaints about them. the welder said they were some of the best he'd seen.

BLOWN 5.0 FOX · May 15, 2007

i rock the 6pt MM cage- worth the extra money. (Went from a 4pt autopower) the fit was perfect!!

trueblue01 · May 15, 2007

Now does anyone have this cage with aftermarket seats?

gcwh02 · May 15, 2007

trueblue01 said:
Now does anyone have this cage with aftermarket seats?

my 6pt should be at my house tomorrow. Im going to try to put it in during the weekend and ill let you know. I have aftermarket seats and 5 pts waiting too

trueblue01 · May 23, 2007

gcwh02 said:
my 6pt should be at my house tomorrow. Im going to try to put it in during the weekend and ill let you know. I have aftermarket seats and 5 pts waiting too

Have you finished the install yet?

MM Rollcage quality

gcwh02

New Member

gcwh02

New Member

Busted07

I need my gorilla to be about an inch longer.

Attachments

gcwh02

New Member

Busted07

I need my gorilla to be about an inch longer.

SRT

New Member

carbed87

Member

gcwh02

New Member

jikelly

Busted07

I need my gorilla to be about an inch longer.

ozanracing

New Member

Busted07

I need my gorilla to be about an inch longer.

BLOWN 5.0 FOX

Member

trueblue01

gcwh02

New Member

trueblue01

Similar threads

MM Rollcage quality

New Member

New Member

I need my gorilla to be about an inch longer.

Attachments

New Member

I need my gorilla to be about an inch longer.

New Member

Member

New Member

I need my gorilla to be about an inch longer.

New Member

I need my gorilla to be about an inch longer.

Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency