My new project!

281pony · Oct 31, 2009

if you start doing body work/painting, let me know. im gonna paint the notch this winter possibly. the interior is mint now, so i want to freshen the white up a bit on the outside.

i'm gonna have access to a 6-way beadblaster soon that we just got (so sick) so i might utilize that and all my other luxuries and make it pretty too.

Cobra912 · Oct 31, 2009

There is one on Ebay for about 50 bucks.

Cobra912 · Oct 31, 2009

85 86 87 88 89 90 FORD MUSTANG RADIATOR LARGE HOLD DOWN on eBay.ca (item 110452143594 end time 07-Nov-09 00:09:51 EST)

SMOKEDYA · Nov 1, 2009

Well alittle trouble with the fan controller and found out it's fried so i'll get a new one hopefully tomorrow.I did get to take it for a test spin around the block.Brakes are spongy i'm assuming do to the rear disc conversion and no proportioning valve? Other then that everything seemed good!It's driveable till it gets hot (cause the fans dont kick on) so till i get the controller i can wash it, reinstall the interior that i took out to run wires,and also do some little touch up under the hood.This has been a very fun project and once the funds are back phase 2 will start! Now i'm looking to see if my buddy with a 90 GT is ready?

peace

john

fiveohwblow · Nov 1, 2009

Use your skills to paint that hood! It's lookin sharp!

SMOKEDYA · Nov 2, 2009

Thanks! i might try my skills at it? this guy at my girl friends work does body work for a living on the side,he charges $35 an hour so i might have him fix the cowl and roof and then have him respray the whole car,depends what it will run me?But then i might try my hand/eye at it also ? I think for now i will just wire the fans to the switch and roll with that for now,i called every where and no one has any controllers left if and since i might go this route i will just order the DCC or whatever that controller is everyone rathers to use instaed of the type of controller i have. peace

john

1990Coupe · Nov 2, 2009

So thats the engine from the coupe right? You parted the coupe? Sorry for the question if its already been said, i didn't read every page

cenok is family · Nov 2, 2009

yeah its the motor from the coupe. they traded rollers.

SMOKEDYA · Nov 2, 2009

1990Coupe as cenok is family said. Yes we traded everything except for engine trans and radiator and ECM. I found out today it dosent like to start or run to good with no gas peace

john

5.0Droptop · Nov 2, 2009

Hey John. My buddy and I started boxing his bay. You inspired us.

http://www.stangnet.com/mustang-forums/776506-project-its-about-time-89gt.html

50foxbody · Nov 2, 2009

SMOKEDYA said:
1990Coupe as cenok is family said. Yes we traded everything except for engine trans and radiator and ECM. I found out today it dosent like to start or run to good with no gas peace

john

yea my guages dont work so i wonder how many times it will happen to me when i start driving it

SMOKEDYA · Nov 3, 2009

well my gauges work but i was sitting on a slope that leaned to the driverside,and since i was low on gas it all ran to that side of the tank.The pick up is on the passengerside of the tank.I had a guy help me push it so the ass end was slopped down and it started!peace

john

50foxbody · Nov 3, 2009

i wasnt doubting your guages not working in that beautiful car

undercnstrction · Nov 17, 2009

i know this thread is a bit aged but HOLY SCHNIKE!!!!!! that thing came out sweet!

i'm not asking you to divulge any "ancient chinese secrets" but.........WHERE THE HELL ARE THE ALL OF THE WIRES??????

SMOKEDYA · Nov 17, 2009

undercnstrction said:
i know this thread is a bit aged but HOLY SCHNIKE!!!!!! that thing came out sweet!

i'm not asking you to divulge any "ancient chinese secrets" but.........WHERE THE HELL ARE THE ALL OF THE WIRES??????

Thanks,and no secrets! they are tucked up in the fender's. peace

john

undercnstrction · Nov 17, 2009

i don't suppose you would have any pics of that do you?? did you fabricate a box of sorts to mount everything in? otherwise it would be exposed to road debris??

1990Coupe · Nov 17, 2009

What did u end up painting those valve covers with? it looks like some sort of wrinkle finish?

SMOKEDYA · Nov 17, 2009

undercnstrction said:
i don't suppose you would have any pics of that do you?? did you fabricate a box of sorts to mount everything in? otherwise it would be exposed to road debris??

Heres a pic of my coupe i did to give you an idea.It wont be exposed to the weather because the wireing is between the fender and inner fender:

peace

john

SMOKEDYA · Nov 17, 2009

1990Coupe said:
What did u end up painting those valve covers with? it looks like some sort of wrinkle finish?

nope smooth finish and all it is wrought iron flat black. peace

john

undercnstrction · Nov 17, 2009

SMOKEDYA said:
Heres a pic of my coupe i did to give you an idea.It wont be exposed to the weather because the wireing is between the fender and inner fender:

peace

john

awesome! thanx for the pic.

My new project!

281pony

Active Member

Cobra912

Active Member

Cobra912

Active Member

SMOKEDYA

fiveohwblow

Official Member

SMOKEDYA

1990Coupe

cenok is family

SMOKEDYA

5.0Droptop

...all those nights we shared, and you're a dude??

50foxbody

Member

SMOKEDYA

50foxbody

Member

undercnstrction

New Member

SMOKEDYA

undercnstrction

New Member

1990Coupe

SMOKEDYA

SMOKEDYA

undercnstrction

New Member

Similar threads

My new project!

Active Member

Active Member

Active Member

Official Member

...all those nights we shared, and you're a dude??

Member

Member

New Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency