Progress Thread Tannerc91gt’s Build(s) Thread

RangerJoe · Sep 24, 2016

I'm sure you will, but I would follow up with ARP on that one. They should at least replace it.

Joe

tannerc91gt · Sep 24, 2016

tannerc91gt · Sep 24, 2016

RangerJoe said:
I'm sure you will, but I would follow up with ARP on that one. They should at least replace it.

Joe

I plan to. It's hit or miss whether they replace 1 stud, the whole set of just sell you a $20 stud.

RangerJoe · Sep 24, 2016

tannerc91gt said:

Wow! That's tough. Lots of PB Blaster and maybe some heat to help ease it out?

Joe

Boosted92LX · Sep 24, 2016

tannerc91gt said:

I would smack it with a punch a while, and heat the metal around it before trying the ease out on it.

A5literMan · Sep 24, 2016

^^ those are the options I would try

tannerc91gt · Sep 24, 2016

Made the mistake of checking in on my old car. (I was trying to buy it back actually).
Guy followed through with my build plan to the T. Looks awesome.
Huron Speed fbody kit modified, Holley EFI, 4l80. Used my radiator, etc etc. basically finished what I was unable to. Car will make 1000hp no problem this way.

A5literMan · Sep 24, 2016

Meh...your white car is cooler

tannerc91gt · Sep 28, 2016

Success. WD40, LH drill bit, screw extractor, hammer, socket wrench, beer. But it's out.

ARP is sending me a few replacements for some bolts I was concerned with. And they're going to take these back for testing. Just hope to install the new ones successfully. I'll be going to China studs otherwise.

Yanked the old cam and installed the new one using my trusty old lifter holders (aka smashed brake lines).
The cam retainer plate developed a hairline crack upon reinstallation. Amazing considering they're only torqued to 18ft.lb.
The only one I had in my stash is not up to snuff so I ordered a new one from summit.

Now we're back to waiting.

Davedacarpainter · Sep 28, 2016

tannerc91gt said:
Success. WD40, LH drill bit, screw extractor, hammer, socket wrench, beer. But it's out.

ARP is sending me a few replacements for some bolts I was concerned with. And they're going to take these back for testing. Just hope to install the new ones successfully. I'll be going to China studs otherwise.

Yanked the old cam and installed the new one using my trusty old lifter holders (aka smashed brake lines).
The cam retainer plate developed a hairline crack upon reinstallation. Amazing considering they're only torqued to 18ft.lb.
The only one I had in my stash is not up to snuff so I ordered a new one from summit.

Now we're back to waiting.

I bet that was a satisfying moment when you pulled that out of the block.

Good for you brother.

I'm really enjoying reading your thread, even with the bowtie stuff!

mikestang63 · Sep 28, 2016

Way to go Tanner. Cool idea on the lifters as well. I think Ron Anderson made some kind of tool for SBF that allows you to leave remove the cam without removing the heads or intake... never used it.

tannerc91gt · Sep 29, 2016

ARP ended up overnighting the bolts from California. Got them this morning and gave them a shot this evening. Sweating bullets, no doubt about it.

Ended up being successful. Which is a big relief. Unfortunately still waiting on a summit order (and now I've found a few things I wish I had thought to add last night).

Old retainer plate on the left, spare on the right. The newer design (left) has countersunk bolt holes where the other plate must be older. Don't trust the bolts to not back out so I ordered a replacement. If you look closely the bottom hole is out of round and I believe this is what caused it to crack upon reinstallation.

The seal on the old one is jacked up anyways, and seeing as this plate directs oil to the lifters, it seemed worth $20.

tannerc91gt · Oct 3, 2016

The new retainer plate had the same oblong hole but managed to torque it down without issue.

But what fun would this be without problems. Luckily I have plenty to spare

Now in hindsight, I could have maybe foreseen this issue. But it still pisses me off

An angled fitting would have prevented this. A balancer without AC provisions would probably have prevented this.
Mentioning this sht in the item description absolutely would have prevented this.
But here we are all the same.

Noobz347 · Oct 3, 2016

Well there's the problem right there.

Lemme know if I can help some more.

mikestang63 · Oct 3, 2016

Noobz347 said:
Well there's the problem right there.

Lemme know if I can help some more.

old_blue · Oct 4, 2016

tannerc91gt said:
Made the mistake of checking in on my old car. (I was trying to buy it back actually).
Guy followed through with my build plan to the T. Looks awesome.
Huron Speed fbody kit modified, Holley EFI, 4l80. Used my radiator, etc etc. basically finished what I was unable to. Car will make 1000hp no problem this way.

Where can we find the thread on this? Ls1tech?

tannerc91gt · Oct 4, 2016

old_blue said:
Where can we find the thread on this? Ls1tech?

There's no thread to the best of my knowledge, I just messaged him trying to buy it back and he filled me in

hoopty5.0 · Oct 4, 2016

tannerc91gt said:
There's no thread to the best of my knowledge, I just messaged him trying to buy it back and he filled me in

The Cobra?

tannerc91gt · Oct 4, 2016

Bought a balancer puller online from Advanced, all about the 20% coupons.
It says it's in stock so I drive over to pick it up. Lady pulls up my order and walks off in the back looking for a "13 piece harmonic balancer" while repeating the words over and over. I'm not sure what that is but I know she's not going to find it.
Another guy quickly walks up to rudely inform me they don't have those in stock and I'll have to order it. I still don't know what it is they're looking for. So i finally get to explain that it's a tool and I'm informed that "it's a rental" and they run off to the back again to dig through the rental tools.
Frustrated, I went and grabbed it off the shelf and brought it to the counter. when they finally came back, they acted like they knew all along what I was after.

My head hurts.

tannerc91gt · Oct 4, 2016

hoopty5.0 said:
The Cobra?

Yes sir. Posted an updated picture above

Progress Thread Tannerc91gt’s Build(s) Thread

RangerJoe

I leave the horn on while driving

tannerc91gt

This last 25% is foreign territory at this point

tannerc91gt

This last 25% is foreign territory at this point

RangerJoe

I leave the horn on while driving

Boosted92LX

It's only an inch or two. What's the big deal?

A5literMan

At least it is lumpy...

tannerc91gt

This last 25% is foreign territory at this point

A5literMan

At least it is lumpy...

tannerc91gt

This last 25% is foreign territory at this point

Davedacarpainter

Chicks can make things hard if they’re inspired...

mikestang63

tannerc91gt

This last 25% is foreign territory at this point

tannerc91gt

This last 25% is foreign territory at this point

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

mikestang63

old_blue

tannerc91gt

This last 25% is foreign territory at this point

hoopty5.0

mechanicus terribilis

tannerc91gt

This last 25% is foreign territory at this point

tannerc91gt

This last 25% is foreign territory at this point

Similar threads

Progress Thread Tannerc91gt’s Build(s) Thread

I leave the horn on while driving

This last 25% is foreign territory at this point

This last 25% is foreign territory at this point

I leave the horn on while driving

It's only an inch or two. What's the big deal?

At least it is lumpy...

This last 25% is foreign territory at this point

At least it is lumpy...

This last 25% is foreign territory at this point

Chicks can make things hard if they’re inspired...

This last 25% is foreign territory at this point

This last 25% is foreign territory at this point

Stangnet Facilities Maint Tech... Er... Janitor

This last 25% is foreign territory at this point

mechanicus terribilis

This last 25% is foreign territory at this point

This last 25% is foreign territory at this point

Similar threads

Privacy & Transparency

Privacy & Transparency