@CarMichael Angelo id still like to point out that Ford is at fault for putting a 91 harness in a 90 model car. Had they not pulled the ol switcheroo, I’d be doing burnouts in my driveway already
And you'd be right back where you were when you experienced 20+ psi with sht blowin' off your engine and landing across the street somewhere.@CarMichael Angelo id still like to point out that Ford is at fault for putting a 91 harness in a 90 model car. Had they not pulled the ol switcheroo, I’d be doing burnouts in my driveway already
I'm talking with him now.Did you ask Jesse Brown on facebook? He's pretty gangster with all the wiring/circuitry.
LOL I feel like I've built 3 harnesses now.lol for sure. I landed an MS3X system and have to build the full harness. Gonna bllllooooowwwwww
Hopefully I haven't fried anything. I'm going to switch it to 5v and change the ground to SG and see what happens. I bet it fires right the fck up.lol you need to use what the input wants. In this instance the opto input if im not mistaken uses a 5v input. the vr input may like the 12v pullup better. sometimes you have to use a 10k resistor in the r23? [that will need to be confirmed] to lower the threshold voltage for the input.