Sounds like you've sold on Craigslist beforeI can see the add now: Wanna add 300hp to your mustang? Well look no further! Full race inspired flowmaster super cat-cat, these babies aren't even street legal. Tuned for weight reduction, peak horsepower and torque. One off custom system $350 pick up only!
Right now everything but the pipe is still on. I had planned for full emissions delete, just not ready to tackle it yet.Like you said you've done in the past. Short belt and block the plugs off
I know I know. I didn't get a good shot of the complete system due to the owner getting funny with me because I was right next to his guy while he was doing the work and I was taking pictures. Trying to tell an older fella that I am a member of an Elite group of car guys who take pictures of their rides and share it on the internet wasn't working out for me.
This car is going to be an AutoX or road course type of street car?The ALT plug from PA
I Believe these are the lower control arms I'll be going with. https://lmr.com/item/MM-MMRLCA102/maximum-motorsports-mustang-rear-control-arms-7998-sport (Opinions?)
I need Guidance on what springs to use. I need all around better suspension I will be using a MM panhard bar, I don't know which upper rear control arms yet and probably a torque arm later down the road. I need to figure out front lower control arms, struts and shocks. MM CC plates will be used and steeda or eibach sway bars. I have new strut tower braces front and rear already.
98% street car 2% anything I can get into local. Before we move I have to compete in true street in GA and or FL and the Spring Break Shoot Out!This car is going to be an AutoX or road course type of street car?
Sent him a messageThere is a guy on corral.net that sells refurbished 94/95 spindles. They are a work of art. I have them on two of my 3 foxbodies. Search that site, you will find them/him under the name 209pony.
You can get rotors, pads, calipers and brackets all from Napa or Oriellys. It's not too expensive.
Junkyard, dude. They'll have a metric sht ton of SN cars you can rob parts off of.HUGE DILEMMA:
I was originally going to do the lmr 5lug swap kit $399 but the rotors/spindles only allow for some wheel fitments. https://lmr.com/item/LRS-4234K/1987-1993-Mustang-5-Lug-Conversion-Kit
Doing the swap with 94-95 spindles would be the way I'd like to go but don't have a source to pull all the parts needed. I don't want to drop $2600 on a full kit with 96+ spindles.
Help a brother out
@FoxMustangLvr @RaggedGT @hoopty5.0 @GroverDill @MikeH686
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?