Nicks fast back conversion
- Thread starter horse sence
- Start date
Pulled the starter apart ,the contacts were corroded ,cleaned them and it works ,but new stuff is getting crappier so I don't expect it to keep working ,it is nothing like the original starter
I did, built it out of scrap metal ,works good . Fired up several small block fords on it
So we ran into a problem, haven't fired the motor yet because it isn't oiling through the push rods to the rockers .
Pulled it apart thinking I got a cam bearings wrong and happend to look at a lifter and noticed there is no hole in the lifter puck for oiling the rockers . Pulled it apart for nothing! It has 60 pounds pressure now but no oil to the rockers, is this a f'd up batch of lifters or are they for some other application? We are running a 280h comp cam ,never seen this before!
Pulled it apart thinking I got a cam bearings wrong and happend to look at a lifter and noticed there is no hole in the lifter puck for oiling the rockers . Pulled it apart for nothing! It has 60 pounds pressure now but no oil to the rockers, is this a f'd up batch of lifters or are they for some other application? We are running a 280h comp cam ,never seen this before!
Attachments
I am thinking they are for a 390 -428 ,they have solid push rods and oil through the rocker shafts . Already tossed the box so no way to verify what they are for
Have new set coming Tuesday, they are comp cam lifters and it says improved for better push rod oiling . And thats what we want blast it!
Similar threads
